Symbols - Ryobi AG401 Operator's Manual

Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the tool better and safer.
SYMBOL NAME
V Volts
A Amperes
Hz Hertz
min Minutes
Alternating Current
--- Direct Current
n No Load Speed
0
.../min Revolutions or Reciprocation Per Minute
Safety Alert Symbol
Lightning Alert Symbol
The purpose of safety symbols is to attract your attention to possible dangers. The safety symbols, and
the explanations with them, deserve your careful attention and understanding. The safety warnings do
not by themselves eliminate any danger. The instructions or warnings they give are not substitutes for
proper accident prevention measures.
SYMBOL MEANING
SAFETY ALERT SYMBOL:
Indicates danger, warning, or caution. May be used in conjunction with other symbols or pictographs.
DANGER:
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
WARNING:
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
CAUTION:
yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric shock
and personal injury.
NOTE:
Advises you of information or instructions vital to the operation or maintenance of the equipment.

SYMBOLS

Failure to obey a safety warning will result in serious injury to yourself or to others.
Failure to obey a safety warning can result in serious injury to yourself or to others.
Failure to obey a safety warning may result in property damage or personal injury to
DESIGNATION/EXPLANATION
Voltage
Current
Frequency (cycles per second)
Time
Type or a characteristic of current
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes,
surface speed, orbits etc. per minute
Indicates danger, warning or caution.
It means attention!!! Your safety is
involved.
The lightning flash with arrow head within
a triangle is intended to tell the user that
parts inside the product are a risk of
electric shock to persons.
Page 6
SAVE THESE INSTRUCTIONS