Page 2
So thank you! And please keep us posted on your progress as you Rock The Bike! find rock the bike on Yours,...
Page 3
1. Stem 9. Axle Skewer Bolt 16. Chain Guard 2. Grip 10. Wheel Mounting Slot 17. Pedal 3. Bell 11. Front Crossbeam 18. Chainring 4. Handlebars 12. Transport Wheel 19. Rear Legs 5. Pitcher Socket 20. Seatpost Lever 6. Blender Base 13.
Page 4
ASSEMBLY assembly PEDALS CROSSBEAM 1. Identify the right side pedal by it’s sticker or stamp, then install 1. Place the frame on its side on a soft surface such as carpet it into the right crank arm using the 15mm wrench. or cardboard.
Page 5
assembly assembly 5. Check chain tension by rotating the pedals backwards a few 3. Loop the chain over the chainring (a), and over the teeth of the wheel cog (b), then insert the wheel through the front legs. turns. If there is a tight spot in the rotation, loosen the skewer and move the wheel backwards so the chain is taught as possible without causing a tight spot in the rotation.
Page 6
assembly assembly HANDLEBARS AND STEM BLENDER BASE 1. Unscrew and keep all four 1. Loosen the two wingnuts on the upper platter by one or two screws in stem plate then place turns, and turn the platter counter-clockwise so the roller is the handlebars in the round hole slightly touching the tire.
Page 7
We do not recommend using this product in the rain, snow, or other wet • Do not expose your jar to temperatures over 176°F (80°C). Ingredient conditions that could cause damage to you or your Rock the Bike product. temperatures should not exceed 115°F (46°C). Please note that boiling •...
WARRANTY TRANSPORTATION Rock the Bike products come with a 2-year warranty against manufacturing Whether you’re going to a classroom down the hall or a trade show across the defects. This warranty does not cover damage due to wear and tear, loss,...
Page 9
Rock the Bike 888-354-BIKE (2453) 6323 San Pablo Ave. 510-338-3326 Oakland, CA 94608 fax 510-735-9838 www.rockthebike.com info@rockthebike.com...
Need help?
Do you have a question about the Fender Blender Pro High Performance and is the answer not in the manual?
Questions and answers