Strong MDI Monarch Installation Manual

MONARCH
INSTALLATION MANUAL

IMPORTANT

Unpack carefully and verify that all parts
are included in the package. Manipulate frame
and screen with care to avoid any damage.
READ ALL INSTRUCTIONS BEFORE PROCEEDING

PARTS CHECKLIST:

4- Frame sections (2 - sides with
inserts* and 2 - top and bottom)
8- 1/4-20 X1/2" machine screws
2- Wall brackets
1- PVC screen (in a tube)
*Note that the corner
If the box contains two Monarch
inserts and the wall
structures: each structure is identifi ed with
bracket mounts are
a color dot, one red and the other green.
pre-assembled.
Red dots
REAR VIEW
Legs (optional):
2- Part A.
2- Part B.
8- 1/4-20 X 1/2"
machine screws
Corner insert
/ FIGURE 1

ASSEMBLY

1-
Place the four frame sections as indicated in
fi g.1. on a fl at clean surface, taking care not to
damage the frame fi nish.
2- Assemble the four sides by inserting the
corners on the top and bottom parts.
3-
Assemble each part with the 1/4-20 screws
supplied. Apply gentle pressure on the corners
while tightening the screws for a nicer joint
fi nish.
4- Verify the fi nished frame and adjust if
necessary.
5-
Place the screen on the frame ; align the
red dot on the screen with the one on the
frame. Handle screen by the edges only, avoid
touching screen surface.
6- Attach the screen to the frame with the
snaps and adjust if required. Snaps are pre-
adjusted but may require minor adjustments.
1 877 755-3795
sales@strongmdi.com
www.strongmdi.com