Advertisement
Quick Links
Product Guide:
SPYWAT902C
Getting to know your watch
Note: to make the device water resistant, replace
the cover over the microphone to one without a
hole. Included in the box.
Getting Started
Charging your clock
Before using the SPYWAT902C we recommend
making sure the device is fully charged. To charge,
connect to the supplied charger. The blue light
will come on solid, with the red light flashing
alongside it. Once fully charged the blue and red
light will both come on solid.
Playback on your computer
For playing back the files on your computer, we
recommend using VLC Media Player. The latest
version can be downloaded for free from http://
www.videolan.org
Setting up the watch time
To adjust the time, pull out the watch time set
dial, turn it until the correct time is displayed, and
then push it back in.
Connecting to your Computer
Unscrew the cap covering the USB port, then
insert the jack style end of the cable. Connect the
other end in to a free USB port on your computer.
Your computer will automatically install the
required drivers. The watch will show up as a new
removable device, and your can browse it just as
your would a USB storage drive, SD card or other
external storage device.
Advertisement
Related Manuals for SpyCameraCCTV SPYWAT902C
Summary of Contents for SpyCameraCCTV SPYWAT902C
- Page 1 To adjust the time, pull out the watch time set dial, turn it until the correct time is displayed, and Before using the SPYWAT902C we recommend then push it back in. making sure the device is fully charged. To charge, connect to the supplied charger.
- Page 2 Troubleshooting Powering the recorder on (standby mode) Taking photos Setting date & time for video timestamp Press and hold the power button for 2-3 seconds. From standby mode, press the photo record On the CD you will find a file called time.txt Problem Solution The status light will light up both blue and red.
Need help?
Do you have a question about the SPYWAT902C and is the answer not in the manual?
Questions and answers