Spirax Sarco FT 14 Manual

spirax

Description :

FT - 14 ball float steam trap is a condensate drain trap of Cast
Iron body and Stainless Steel internals.

Available Sizes and Pipe Connections :

40 and 50 NB screwed BSPT / NPT
Note : Available Non-IBR only.

Available types and Limiting Conditions :

FT 14 TV with Thermostatic air vent
FT 14 SLR with Steam lock release

Maximum operating conditions :

Note :
PMO Maximum Operating Pressure
TMO Maximum Operating Temp.

Body Design Conditions :

0
16 barg at 120 C
0
13 barg at 220 C
Cold Hydraulic test pressure 32 barg.

Material :

Sr. Part Material
No.
1. Body Cast Iron
2a) Cover Bolts Carbon Steel
b) Cover Buts Carbon Steel
3. Cover Gasket Reinforced exfoliated Graphite
4. Cover Cast Iron
5. Main Valve Assly. Stainless Steel
with Erosion Deflector Type 304
6. Main Valve Assly. Reinforced exfoliated Graphite
Gasket
7. Main Valve Assly. Carbon Steel
Studs & Nuts 40
& 50 NB
8. Ball Float Stainless Steel Type 304
9. Air Vent Assly. Stainless Steel Type 316
10. Air Vent Seat Gasket Stainless Steel Type 304
*11 SLR Unit Stainless Steel Type 410
*12 SLR Unit Gasket CRCA
*13 SLR Seat Stainless Steel Type 410
*14 SLR Seat Gasket Stainless Steel Type 304
15 Diflector Plate Stainless Steel Type 304
*Items not shown. See overleaf.
Ball Float Steam Trap
FT 14
Type PMO TMO
0
FT 14-4.5 4.5 bar 156 C
0
FT 14-10 10 bar 184 C
0
FT 14-14 14 bar 198 C
Standard
IS 210 FG 260
H.T.IS 1367 Gr. 8.8
H.T.IS 1367 Gr. 8
IS 210 FG260
ASTM A 276
H.T.IS 1367
Gr 8
ASTM A-240
ASTM A-240
ASTM A-240
ASTM A-276
IS513
ASTM A-276
ASTM A-240
ASTM A-240

Dimensions (approx.) in mm. :

Size A B C
40 NB 270 127 110
50 NB 300 140 125
D E F Weight
244 200 274 17.5 kg
250 205 286 22 kg
General Tol : k3