Table of Contents
Advertisement
Installing and connecting the appliance
en
5
Installing and
connecting the
appliance
I ncluded with the appliance:
I n s t a l l i n g a n d c o n n e c t i n g t h e a p p l i a n c e
( Water drain hose*
0 Mains cable
8 Water drain hose*
@ Water supply hose
H Second water supply hose
(identified by a red marking) on
models with a hot water supply
hose*
P Snap connector*
X Bottom plate
*
Depending on the appliance
specifications
4
Remove any packaging and
1.
protective covers completely from
the appliance.
Remove the protective film from the
2.
control panel.
Remove the appliance from the base
3.
padding.
Operating the appliance on
Note:
the base padding is strictly
forbidden.
Open the cover on the appliance
4.
and take out all the accessories.
You can now install and connect the
appliance.
Caution!
Risk of material damage/damage to the
appliance
Objects remaining in the drum that are
not designed for operation with the
appliance may result in material
damage and damage to the appliance.
Remove these objects, along with all
accessories, from the drum.
Installing the appliance
:
Warning
Risk of injury!
The appliance is very heavy. Lifting it
■
may result in injury.
Do not lift the appliance on your
own.
The appliance has sharp edges on
Ri s k of i n j u ry!
■
which you could cut your hands.
Do not take hold of the appliance by
its sharp edges. Wear protective
gloves to lift it.
If the hoses and mains cables are
Ri s k of i n j u ry!
■
not correctly routed, they may
constitute a tripping hazard, which
may result in injury.
Route hoses and cables such that
they do not constitute a tripping
hazard.
Advertisement
Table of Contents
