Advertisement
4. Input your Router's password.
5. After "Wi-Fi connected", please edit Name, and enter/confirm
password of this camera. Press "Finish" and start to enjoy your
IP Camera by selecting the camera from your camera list
4
5
Trouble Shooting
CANNOT PAIR THE CAMERA SUCCESSFULLY
1. Check whether the camera is powered by micro USB (DC 5V)
2. If there are too many Wi-Fi connections around your device, turn
them off to avoid any disturbance and pair again.
3. Check that the router is working properly and that it operates on
2.4GHz.
4. Check that the SSID and password are correct.
DOESN'T WORK PROPERLY or LOSS OF SIGNAL
1. Check whether the device is within coverage of your Wi-Fi
router/repeater. Move the device or router to a different location.
2. Check that the router is working properly
CANNOT RECORD VIDEOS
1. Check whether the camera has inserted microSD card.
2. Change the recording mode to "Record full-time".
To re-connect a camera that has been paired to
your router, please follow step 6 & 7 .
6. Press "Add a camera" → "Reconnect your camera"
7. Press 'Scan QR code'. After scanning the QR code of this
camera, input the name and password of it. Press 'Finish' then
the camera will be shown on the list now.
6
6
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Please note that changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures: --Reorient or relocate the receiving
antenna. --Increase the separation between the equipment and
receiver. -- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected. --Consult the dealer or an
experienced radio/TV technician for help.
9
How To Use
Snapshot
Record
Talk
Voice
*For Android, Photos and videos will be saved in
Advanced Setting
1. Recording Mode
Record full-time: non-stop recording videos
Record alarms: recording when motion is detected
2. Timestamp
7
To show the date and time on the live stream, snapshot and
recorded videos.
7
10
Captures real-time photos*
Captures real-time videos*
Talk to the user beside the camera
(iOS only) Toggle to hear the sound from camera
or to mute
Please insert SD card, reboot the camera and
press "Format SD card" before recording.
THANK YOU
Album
8
Advertisement
