Hangar Cameras Cobra-180 Instruction Manual

COBRA -180
1/3" Sony Weatherproof IR Cameras
Standard resolution,
600 TVL
Model: Cobra-180
Description:
This is a high quality Color Weatherproof Camera designed for
NTSC system. Using the latest CCD technology, the camera can
produce high resolution with little distortion. The camera has a
wide operation temperature range and is not subject to distortion
from magnetic field. With its lightweight and compact size, this
camera can be used for monitoring and surveillance.
Cautions:
1. To avoid electrical shock, do not attempt to disassemble the
camera.
2. To prevent fire or shock hazard, do not use near a bath tub,
wash basin, sink or laundry tub. Do not use in a swimming
pool.
3. Do not overload electrical outlets or extension cords as this can
result in fire or electric shock.
4. Refer servicing to qualified personnel only.
Limited 2 Year Warranty:
This warranty gives the original purchaser specific legal rights and
you may have other rights which vary from state to state if the
products do not function because of any defect in material or
workmanship, the product will be repaired for free for a period of 2
year on Parts (CCD not included) & labor from the date of original
purchase. This warranty does not cover incidental or consequential
damages unless the state of owner's residence specifically
prohibits limitations on incidental or consequential damages.

Important Notice:

The warranty will be void if the seal label is torn off from the
camera.

Packing List:

Camera
Instruction Manual
Mounting Screw
Hexagon Socket Head Key
12VDC,NTSC
1
1
4
1
Operation Procedures:
Trouble and Solution:
1. No picture after providing power
The power supply voltage may be abnormal pls check the power
supply voltage and cable connections.
2. The picture shows lines of interference
This may be caused by the power supply. You may need to filter
the power supply or shield the cabling from interference. Check the
monitor and peripheral equipment being used as well.
3. The picture background color changes continuously
Fluorescent lights have electromagnetic fields that may cause
color to roll. This is a common issue with some cameras.
Increase the distance between the camera and the fluorescent
lights to decrease the likelihood of this happening.

Specifications:

Pick up Device
TV System
Picture
Elements
Horizontal
Resolution
Sensitivity 0 Lux/F1.2 (Infrared LED On)
Scanning
System
Synchronizatio
n
Infrared
Spectrum
S/N Ratio More than 48 dB, (AGC Off)
Auto Gain
Control (AGC)
White Balance
Electronic
Shutter
Back Light
Compensation
Infrared LED
Infrared LED
Range
1/3" Color S ONY CCD
NTSC
752Hx582V
600 TVL
2:1 Interlace
Internal
850nm
Auto
Auto
Auto
Auto
72pcs / F5
60m