TetraMouse TMBT Manual

The TetraMouse Bluetooth Adapter allows the TetraMouse, or any other USB mouse, to
be connected to a computer using a Bluetooth version 4.0 or higher interface.

BLUETOOTH INDICATOR

CHARGING INDICATOR

USB MINI
CHARGING PORT

POWER SWITCH

Turn the adapter power on and off using the Power Switch pushbutton next to the
Charging Port.

LED INDICATORS

Red LED - Charging and Battery Status Indicator
When a power charger is plugged into the USB Mini charging port, the red LED comes
on when battery is charging and goes off when the battery is fully charged.
If a charger is not plugged in, the red LED blinks when battery is low (below 3.0V).
Blue LED - Bluetooth Connection Status Indicator
Blinks slowly (about once per 2 seconds) when the adapter is connected to a host.
Blinks fast (about once per second) when the adapter is not connected to a host.
Blinks very fast (twice per second) when the adapter is in error mode. If error mode is
encountered, turn the adapter off and on again using the Power Switch.

CONNECTORS

USB Mini Charging Port
The USB Mini Charging Port located next to the Power Switch is for battery charging or
external battery connection only. You can use any USB charger or USB battery pack,
such as those made for tablets or cell phones, or you can use the supplied USB Mini
charging cable to connect to a USB computer port to charge the battery.
USB Mouse Port
The USB Mouse Port provides the connection to the TetraMouse (or other USB
mouse).
Auxiliary Port
Not used. (Used for factory programming.)
TetraMouse Bluetooth Adapter TetraMouse Bluetooth Adapter
POWER SWITCH
USB MOUSE PORT
AUXILIARY PORT