Summary of Contents for HELLER WFC
-
Page 1: User Manual
USER MANUAL Water Filter and Chiller Model Number: WFC READ AND SAVE THESE INSTRUCTIONS... - Page 2 BEFORE FIRST USE Read and follow all the instructions in this User Manual even if you feel you are familiar with the product, and find a place to keep it handy for future reference. For your convenience record the complete model number (located on the product identification plate) and the date you received the product, together with your purchase receipt and attach to the warranty and service information.
- Page 3 • Filter replacement is essential for the product to perform as represented. It must be replaced at least every 3 months. • This appliance has been designed to be used continuously. FEATURES USING YOUR WATER FILTER AND CHILLER Before First Use: Clean the appliance and its accessories: •...
- Page 4 Flushing the dispensing system: It is important to rinse out the dispensing system before starting to use your appliance: • Put the base water tank onto the water chiller; ensure that the tank sits into the slots located in top of the water chiller.
- Page 5 NOTE: The “Chilled Water” mentioned above is about 15°C below the Normal Tap Water. Filter life: The life of your filter will be affected by the quality of your tap water. When you notice that the water begins to flow very slowly from the spout it is time to change the filter.
- Page 6 CUSTOMER SERVICE Australian Customer Service GAF Control (Sales) Pty Ltd P.O Box 19 Altona North Victoria 3025 Phone: 1300 659 489 Hours: 9am-5pm (EST) Mon-Fri www.gafcontrol.com.au *This product may vary slightly to the product illustrated due to ongoing product development. READ AND SAVE THESE INSTRUCTIONS...
Need help?
Do you have a question about the WFC and is the answer not in the manual?
Questions and answers