Installation - Viking VBBO1601 Use & Care Manual

INSTALLATION

8. If desired, snap toe kick included with
each unit to front legs. (See illustration #6).
9. SIDE PANEL INSTALLATION (End of Run Only)
•Remove all drawers. (If applicable)
• Remove all protective covering from panel and install using the #10 x 1/2" tek screws provided. (See Illustration #7)
•Attach toe kick to legs (See Illustration #6).
NOTE: FOR WALL INSTALLATIONS:
The front portion of the side toe kick must be shortened to match the front toe kick. (See Illustration #7). The plastic
material can be cut with any common type wood saw blade.
FOR ISLAND INSTALLATIONS:
The side, front, and rear toe kick must be modifi ed (See Illustration #7)
Illustration #7
2. Attach from inside
(front and rear)
toe kick (A)
Front Toe Kick (A)
Side Toe Kick (B)
Rear Toe Kick (C)
Illustration #6
LH Side panel Installation shown
(RH installs the same way)
Toe Kick Dimensions
Wall Installation
16 3/4" (42.5 cm)
27 1/4" (61.6 cm)
N/A
4
Snap toe kick to front
legs
1. Place side panel into area of the
cabinet.
Side toe kick (B)
Island Installation
16 3/4" (42.5 cm)
25 1/2" (64.8 cm)
16 3/4" (42.5 cm)