Quick Start Guide Simple Installa on SkyBox is exactly wired parallel to the indoor monitors no ma er what system it is connected to. a.For 4 wires system: SkyBox Indoor Monitor Indoor Monitor PSU 15V 1.5A PSU 15V 1.5A PSU 15V 1.5A...
Page 3
SkyBox only works with 2.4Ghz WiFi network. 2. RJ45 Ethernet cable connec on 1. How to set factory default Press and hold the “RESET” bu on on the back side of SkyBox for 5 seconds , SkyBox will restore to factory default status. NOTE: before configura on, you have to set the SkyBox to...
Page 4
WI-FI SETUP a. For iPhone or iPad: Step 1: Connect the WiFi from the SkyBox in the WiFi list on iPhone or iPad; choose the WiFi name like “LIDxxxxxxxx”; Step 2: Open the ControlCam App; Step 3: Click “Add a Device”;...
Page 5
Step 10: Click “OK” , SkyBox is added successfully; 2.3. How to add setup device on smart phones(or tablets) Step 1: Open the ControlCam App on the smart phone (or tablet); Step 2: Click “Enter Now”; Step 3: Click “Add a Network Device”;...
Page 6
Please do not make any change of the default se ngs if you are not very sure about. Step 1: Find the IP address of SkyBox in LAN network from your router (TIP: IP address of the device can be found in DHCP client list in your router se ngs).
User Guide 1. Talking When the visitor calls, the device will receive the ring alert. The user can click “Accept” or “decline” on the pop-up call alert. Press and hold“ ” to start talking and release to listen. 2. Unlocking Input unlock password while talking or monitoring.
Page 8
No. “1” means to press “DATA” once + “SET”, No. “2” means to press “DATA” twice +”SET” once. “0” or “confirm” means press “SET” once. Example to set the address “0123” for SkyBox, opera on are as below, Step 1: Press “DATA” + bu on “SET” once to enter “address se ng”...
Need help?
Do you have a question about the SkyBox and is the answer not in the manual?
Questions and answers