Advertisement
Quick Links
GO RADIO
PORTABLE BLUETOOTH & FM SPEAKER
User manual
Important !
Connect the charging adaptor to the Go Radio and charge for
4 hours before first use.
The charging LED will indicate orange
green
when fully charged.
Press and hold the power button
seconds to turn it on.
Bluetooth set-up
Press the
button to select the Bluetooth input.
Pairing Your Device Manually
1.
Press and hold the
button for two seconds to enter Bluetooth pairing
mode. The flashing blue LED, indicates pairing mode.
2.
Enable Bluetooth connectivity on your Bluetooth device (eg. phone, tablet
etc) and pair with the Go Radio (you may need to consult your phone or
tablet operating instructions).
If your Bluetooth device is NFC enabled
You may need to ensure Bluetooth is enabled on
your device.
Touch your NFC device against the logo
1.
top of the Go Radio.
2.
Go Radio will enter automatic pairing mode and
'Go Radio' should appear on your device.
Successful pairing will be signalled by a 'beep' from the unit and the
LED will stop flashing.
Pairing a second device
To pair a different device, press and hold the
enter pairing mode and pair your Bluetooth device as described in the
Bluetooth instructions.
To talk to us, call +44 (0)203 514 1521 (UK Local)
or 1-877-357-8204 (USA)
whilst charging and
on the top of the unit for two
on
button for two seconds to
Radio
Extend the FM aerial for best reception.
To switch to the FM Radio
press one of the preset
buttons 1-3.
Press and hold the
or
buttons to scan for an
available station (a short press
will change the frequency step by step).
Storing and using FM presets
Pressing and holding preset buttons 1-3 will store
the current radio station.
A short press on buttons 1-3 will recall the stored station.
Aux input
Press the
button to select the Aux input.
TOP TIPS
Auto power down
To save power, your Go Radio will automatically turn off after 30
minutes if no music is playing. Press the power button to turn the Go
Radio back on.
Low battery warning
A flashing red LED indicates that the battery is too low and the Go
Radio will enter a standby mode where no music can be played. This
LED will continue flashing for 30 minutes after which the Go Radio will
turn off.
USB Charging
The Go Radio can be used to charge compatible mobile devices. If the
charging adaptor is not connected this will drain the battery.
Battery Safety
!
Your Go Radio contains a high performance battery and charging system
that is designed to work in temperatures that do not exceed 50°C (122°F).
Leaving this product in an automobile where temperatures may exceed this
limit may result in permanent battery damage, fire or explosion. Do not leave
your product in any location where temperatures may exceed this limit.
Please recharge the battery every two months to maintain the battery in
optimal condition.
Advertisement
