Subscribe to Our Youtube Channel
Summary of Contents for GEDA HS 10000
- Page 1 Assembly- and User Manual Electric Infrared- Patio Heater MODEL: Geda HS - 2 kW Art. Nr. HS 10000 Seite 1...
-
Page 2: Safety Instructions
Do not open the head of the patio heater by yourself. Leave all related repairs to an expert. Contact a specialist workshop, your dealer or Geda. In the case of repairs carried out independently, improper connection or incorrect operation, liability and warranty claims are excluded. - Page 3 WARNING! Dangers to children and persons with reduced physical, sensory or mental abilities (eg partially disabled, elderly with disabilities or physical and mental disabilities) or lack of experience and knowledge (for example children). Parts of the patio heater can become very hot and cause burns. Special care is needed when children and vulnerable people are present.
- Page 4 NOTE! Risk of Damage! Improper handling of the patio heater can lead to damage. Carefully handle the patio heater and do not expose it to bumps, hits or vibration. Do not heat a sauna with the patio heater and do not use it in places with high levels of steam. Stop using the patio heater if the plastic components have cracks or become deformed.
-
Page 5: Assembly Instructions
Assembly Instructions: Unpack the patio heater. Check that all necessary parts are present, that nothing is left in the package and that the patio heater is completely free of packaging material. The following instructions will help you to assemble your patio heater correctly. Do not connect the patio heater to the electrical current until you have completely assembled it, if any parts are missing, or if the cables are damaged in any way. - Page 6 Step 3: Slide the power cord through the bottom of the base until it is at the top of the lower pipe. Pull the power cord further out and push it through the middle pipe part. Then screw the lower and middle pipe together. Now repeat this with the upper telescope- pipe.
- Page 7 Step 5: Insert the heating head onto the pipe and screw in the screws again. Step 6: Finally, carefully lay the patio heater on its side and loosen the cable clamp on the base, then screw the clamp back in with the cable secured underneath. Service: Make sure that the two on / off switches are set to "o".
- Page 8 / district. This ensures that waste products are properly recycled and that negative environmental effects are avoided. Therefore, electrical appliances are marked with the proper symbol. Zur Viehweide 4 86473 Schönebach hs@geda-produkte.de www.geda-produkte.de Seite 8...
Need help?
Do you have a question about the HS 10000 and is the answer not in the manual?
Questions and answers