Advertisement
PARAMETERS
Each Reverb machine features both UNIQUE and COMMON parameters in the PARAMETER menu to tweak and customize your sound.
All can be saved per preset. Several COMMON parameters are shown below.
NAME — Allows editing the name of current preset. Use TYPE encoder to select a
character. Use VALUE encoder to change the selected character. Exit by pressing
the VALUE encoder. Hold the TYPE encoder to save the name.
PRSIST — Allows reverb trails to persist after a preset has been bypassed.
HOLD — Assigns the press and hold function of the A, B, and C footswitches. Set
to FREEZE for reverb freeze or INFNTE for infi nite sustain.
EDITING PARAMETERS
While displaying BANK,
NAME, or TIME
push the
VALUE encoder
SAVING PRESETS
Save a preset to the current location:
hold the
TYPE encoder
>> Download the complete user manual: strymon.net/support/bigsky <<
to enter PARAMS
menu
Save a preset to a new location:
hold the
push the TYPE encoder
TYPE encoder
to save your settings
BOOST — Set up a +/- 3dB level boost/cut per preset.
EP — Confi gure the Expression pedal input to be ON or OFF.
EP SET — Set up knobs to be controlled by an expression pedal. While HEEL is
displayed, turn knobs to select minimum settings to be controlled. While TOE is
displayed, turn knobs to select the maximum settings to be controlled.
The full list of parameters are detailed in the user manual.
to select the desired
PARAMETER
turn the
VALUE encoder
turn the
VALUE encoder
and turn to edit the
selected PARAMETER
push the
VALUE encoder
or
to select the bank to
save to
push the TYPE encoder or
the A, B, or C footswitch
to save your settings
Advertisement
