RPS AdenoPlus Quick Reference Manual

QUICK REFERENCE GUIDE

IMPORTANT

See package insert, including QC section, for complete instructions for use, precautions, and study results. For questions
and technical support, call +1.941.556.1850.

INTENDED USE

AdenoPlus is a rapid immunoassay test for the visual, qualitative in vitro detection of Adenoviral antigens (hexon protein)
directly from human eye fluid. The test is intended for professional use as an aid in the rapid differential diagnosis of acute
conjunctivitis. Negative results do not preclude Adenovirus infection nor are they intended to rule out other microbial-
caused infections of the conjunctiva, and should not be used as the sole basis for treatment or other management
decisions.

EXTERNAL QUALITY CONTROL

Positive and negative controls are available directly from RPS. Please refer to the AdenoPlus external controls package
insert for more information.
Note: An unused AdenoPlus device has two faint orange lines in the
result window.
1. Gently dab and drag the sampling fleece in multiple locations along the
inside of the patient's lower eyelid (palpebral conjunctiva) 6-8 times,
and then allow it to rest against the conjunctiva for an additional 5
seconds. Upon saturation with tear fluid, the fleece will glisten.
2. Assemble the test by gently placing the sampling fleece of the sample
collector into the sample transfer window of the test cassette body.
3. Press firmly where indicated until the test feels secure. A double-click
means the test is properly assembled.
4. Open the buffer vial and immerse the absorbent tip for a minimum of
20 seconds.
5. Remove the absorbent tip from the buffer vial, replace the protective cap,
and place the test horizontally on a flat surface for 10 minutes.
email info@RPSdetectors.com, or visit www.RPSdetectors.com
AdenoPlus®
To place an order, call +1.941.556.1850,
R
Sample Collector Test Cassette Buffer Vial