Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Ekselans TSF-1
- Page 1 HD Field Strength Meter TSF-1 240001 User’s Manual...
-
Page 2: Table Of Contents
TABLE OF CONTENTS 1 TSF 1 – USER MANUAL ........................4 1.1 Safety Instructions ......................4 1.2 Contents..........................4 1.3 General Description ......................5 2. Main Menu ........................... 7 3.1 DVB-S2 ..........................7 3.1.1 Satellite ........................8 3.1.2 Local Frequency ....................... 8 3.1.3 Transponder ...................... - Page 3 3.5 Miscellaneous ........................19 3.5.1 Program information ..................... 20 3.5.2 Channel ........................20 3.5.3 EPG......................... 21 3.5.4 Film, Music and Photographs Options ..............21 3.5.5 Satellite Settings ....................21 3.5.6 Auto scan ....................... 22 3.5.7 Transponder ......................22 3.6 System Settings ......................... 22 3.6.1 Country Settings ....................
-
Page 4: Tsf 1 - User Manual
1 TSF 1 – USER MANUAL 1.1 Safety Instructions Thank you for having chosen this product. It is recommended to you carefully read the following safety instructions prior to use: ￭ Please carefully read this manual prior to using the equipment for the first time ￭... -
Page 5: General Description
1.3 General Description... - Page 6 Description Function DC Connector Power supply to/charges the meter ON/OFF Button Turns on and off the meter AV Output Connects the meter to a monitor via an analogical A/V HDMI Output Connect s the meter to a monitor via the HDMI USB Port Connects data memory HDMI Input...
-
Page 7: Main Menu
Indicates battery level Screen LCD Screen 2. Main Menu Pressing the MENU button to access the main menu which is shown as follows: To scroll through the menu options, use the arrow keys▲▼◄► and confirm the selected choice pressing the OK button. 3.1 DVB-S2 To access this section, select the DVB-S2 option and press the OK button. -
Page 8: Satellite
To scroll through the menu options, use the arrow keys ▲▼and confirm the selected choice pressing the OK button. Scroll downwards using the arrow key ▼until reaching the second screen within the DVB-S2 menu with the following options: 3.1.1 Satellite Press the arrow key ►to access the pre-programmed satellite list. -
Page 9: Transponder
3.1.3 Transponder Using the arrow key ► one access the pre-programmed transponders list of the selected satellite. Select the option to be used in the installation via the arrow keys ▲ ▼ and press OK. 3.1.4 Frequency In the event of wishing to enter a certain frequency, enter the value in the MHz through the numerical keys of the keypad. 3.1.5 Symbol Rate To change the symbol rate of the signal, enter the value using the numerical keys of the keypad. -
Page 10: Tone
3.1.7 Tone Press the arrow keys ◄►to activate or deactivate the 22 KHz tone. 3.1.8 Beep Tone Press the arrow keys ◄►to activate or deactivate the "beep" tone. If activated, the meter will beep when accessing the Quick Search satellite screen once that access has been detected. 3.1.9 DiSEqC Mode Select using the arrow keys ◄►... -
Page 11: Diseqc & Input
3.1.10 DiSEqC & Input In the event of selecting the DiSEqC 1.0/1.1, using the arrow keys ◄►one can select the port number. In the event of selecting the Unicable option, the selection will change and using the arrow keys ◄► the "IF Channel" SCR Channel and centre frequency of each can be selected. - Page 12 manual), the orientation and the elevation of the satellite will appear on the top right hand corner of this screen. This can be useful when installing the antenna. From this screen one can access the various submenus by pressing the coloured buttons on the keyboard: ￭TP Scan: Press the red button to scan the current transponder programs.
-
Page 13: Spectrum
3.2 Spectrum Through this option one can access the satellite and terrestrial signals spectrum analyser. Select the desired option from the two possible options. 3.2.1 Satellite Spectrum Using this option the satellite spectrum can be displayed. Once selected the following satellite options screen will appear. On this screen one can directly set the specific transponder parameters to be displayed and to measure the access to the spectrum. -
Page 14: Terrestrial Spectrum
Satellite: selection of the desired satellite from the pre-configured meter list Local Frequency: selection of the local oscillator of the LNB DiSEqC Mode: selection of the DiSEqC or LNB SatCR (Unicable) selector switch if available Transponder: selection of transponder which is desired to be represented in the spectrum directly ... - Page 15 channels / frequencies in the band, use the horizontal scroll arrow keys ◄►. Press the red button to change the bandwidth of the spectrum display. Press the green button to magnify the representation of a particular multiplex. Press the orange button so as, once a multiplex is selected, lock its screen and display all digital measurement values (power, CN, BER and MER).
-
Page 16: Dvb-T2
Press the blue button to scan the selected multiplex and download the programs contained in it. Once finished, the download the first program of the multiplex is displayed. Once the channel is displayed, pressing the info button twice, the information as regards both of the selected program and the quality of the multiplex in question will be displayed. 3.3 DVB-T2 To access this section, select the DVB-T2 option and press the OK button. -
Page 17: Bandwidth
may be changed using the numeric keypad on the meter. 3.3.4 Bandwidth Using the scroll arrow keys◄►one can select the transponder bandwidth to be measured (5 / 6 / 7 / 8 MHz). 3.3.5 Mode Select using the arrow keys◄► the digital terrestrial television standard: DVB-T, DVB-T2 or both in the event that in the spectrum the multiplex of both standards is found. - Page 18 ￭Scan: Press the red button to search the programs of the selected terrestrial multiplex. ￭Auto-Scan: press the green button to perform a search of all programs in the terrestrial spectrum. ￭S/Q: press the orange button to access the following screen which shows the power and quality of the signal of the selected terrestrial multiplex.
-
Page 19: Optical Power
￭Constellation: Press the blue button to access the representation of the constellation of the selected terrestrial multiplex 3.4 Optical power This menu allows one to measure the power of an optical signal. To that end, it will be necessary to specify the wavelength of the signal. -
Page 20: Program Information
3.5.1 Program information This option provides comprehensive information on the terrestrial TV programs downloaded via the DVB-T2 option menu as well as the digital quality digital values of the multiplex belonging to the selected program at any given moment. 3.5.2 Channel This option displays all television programs downloaded into the meter. -
Page 21: Epg
S2<<>>T2: pressing the red button will move quickly through the DVB-T2 programs to those of the DVB-S2 downloaded into the meter. Lock: pressing the green button the selected program will be locked. Del: pressing the orange button the selected program (Select Delete) or all programs (Delete All) will be deleted 3.5.3 EPG With this option the programming guide of the selected programs will be displayed. -
Page 22: Auto Scan
Using this option it is possible to select a satellite from the list to orientate a satellite dish, graphically displaying the power and signal quality values. Manager: pressing the red button the information from the pre-programmed satellites can be edited, as well as adding new satellites. -
Page 23: Country Settings
3.6.1 Country Settings Using the arrow keys ◄►select the desired country. 3.6.2 OSD Language Using the arrow keys ◄►select the desired language. 3.6.3 TV Format Using the arrow keys ◄►select the image format which is displayed in the meter (4: 3 or 19: 9). 3.6.4 Video Output Using the arrow keys ◄►select the video output: RCA if the A/V or HDMI output is connected, or if it were connected. -
Page 24: Speaker
3.6.10 Speaker Using the arrow keys ◄► select the activation or deactivation of the speaker integrated in the meter. 3.6.11 Flashlight Using the arrow keys ◄►turn on or off the flashlight integrated into the back of the meter. 3.6.12 12V Using the arrow keys ◄►activate or deactivate the 12V power supply. -
Page 25: Technical Characteristics
4 TECHNICAL SPECIFICATIONS REFERENCE TSF 1 Code 240001 Measurements DVB-T/T2 DVB-S/S2 Connectors IEC FEMALE 9.5 mm F FEMALE Input frequency 48÷-862 MHz 950÷2150 MHz Input Signal Level -79.5 dBm (MAX) -65÷25 dBm Antenna power supply 5V/12V/17V, MAX 100 mA Demodulation QPSK, 16QAM, 64QAM, 256QAM Symbol Rate LCN on/off... - Page 26 Optical power values -70dB a + 10 dBm@1550 nm Accuracy 0.01 Compatible connectors FC / SC GENERAL Feed and consumption Lithium Battery 7.4V/3000MAH / MAX 10W Dimensions and weight 9.5X15X4.5 cm / 0.5 Kg...
- Page 28 Ekselans by ITSis a registered trademark of ITS Partner (O.B.S.) S.L. Av. Corts Catalanes 9-11 08173 Sant Cugat del Vallés (Barcelona) www.ekselansbyits.com...
Need help?
Do you have a question about the TSF-1 and is the answer not in the manual?
Questions and answers