B+B SmartWorx VESP211 Quick Start Manual

6

Troubleshooting

The primary check for correct operation is the
device LEDs.
For advanced set up information, see the "HELP"
section on the right hand side of each page within
the Vlinx Manager.
Select Diagnostic for a check of communications
status with attached VESP211x device, and then
select the device for which the communications
check is desired. A report of reply times and ping
statistics is generated and can be saved.
Note: you can also send your configuration files to
B+B SmartWorx Technical Support for review.
Reset Mode Switch
Mode Switch Action
Press and Hold in for
Resets the unit.
0-2 seconds.
Puts unit in Console Mode.
Press and Hold in for
The Ready LED turns OFF and
2-10 seconds.
the Serial LED turn On Solid.
Reloads Factory Defaults.
Press and Hold in for
Both Serial and Ready LEDs
more than 10 seconds.
turn On Solid.
Document Number: 710-10571-00_r1_VESP211x_0418qsg
Result
Null Modem
Crossover Cable
–
for DTE to DTE connection
Model# 232NM9
DIN Rail Mounting Kit
– 35mm
Model# DRAD35
1-888-948-2248 | Europe: +353 91 792444
www.advantech-bb.com | E-mail: support@advantech-bb.com
Recommended Accessories
advantech-bb.com
707 Dayton Road | PO Box 1040 | Ottawa, IL 61350
Phone: 815-433-5100 | Fax: 815-433-5109

QUICK START

GUIDE
Models: VESP211, VESP211-232,
VESP211-485
Ultra Compact
Ethernet to Serial Servers
Before you begin, make
sure you have the following:
+ VESP211x product
+ CD - with Software and Manuals
+ Power Supply
+ Additional items, not included:
+Ethernet cable(s)
+Null modem cable(s)
+Mounting accessories kit
www.advantech-bb.com
Fast and easy on the web: