ETNA TFI8014ZT Concise Manual
Hide thumbs Also See for TFI8014ZT:

Advertisement

Quick Links

CONCISE MANUAL

Description

50 º
50 º
40 º
1
2
1. 'Selected cycle' indicators

2. Water softener and rinse agent indicators

3. Programme button
4. On/Off button
5. On/Off indicator

Operation

Switching on

A
B
1. Check that the plug of the connecting cable is in the socket and that the tap is open (if the tap is
2. Load the dishwasher.
3. Put the detergent/tablet in the detergent tray (A) and fill the rinse agent reservoir (B) and the salt
4. Press the On/Off button.
c
5. Select a programme; press the programming button repeatedly until the corresponding 'selected
6. Close the door of the dishwasher.

Stopping or changing a programme

Open the door and press the 'programme button' for at least three seconds.
You will hear an audible signal.
Please note! A programme that has already begun can only be changed in the start-up phase.
After this, the detergent will be sprayed all over the dishes or the machine may have
already pumped out the water. In that instance, you must refill the detergent compartment.
Warning! Opening the door fully during the wash cycle is dangerous. You may be splashed with hot
water from the machine.
Water softener and rinse agent indicators
Light
Description
The rinse agent indicator light switches on when the rinse agent reservoir needs to be replenished.
• If you use dishwasher tablets that contain salt and rinse agent, you do not have to replenish the reservoir.
The salt indicator light switches on when the salt reservoir needs to be replenished. The indicator lamp will stay
flashing for a number of hours after you have replenished the reservoir.
• If you use dishwasher tablets that contain regenerable salt, you do not have to replenish the reservoir.
still closed, the 'quick cycle' indicator will flash).
reservoir (C), if needed.
▷ If you use dishwasher tablets that contain salt and rinse agent, you do not have to add them
separately.
programme' indicator lights up.
The dishwasher will automatically start running the selected programme.
▷ Once the programme has completed, an audible signal will sound for eight seconds. Open the
door and switch off the dishwasher with the On/Off button.
▷ Select another programme if necessary and close the door.
3
4
5
DISHWASHER TFI8014ZT

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TFI8014ZT and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for ETNA TFI8014ZT

  • Page 1 CONCISE MANUAL DISHWASHER TFI8014ZT Description 50 º 50 º 40 º 1. ‘Selected cycle’ indicators 2. Water softener and rinse agent indicators 3. Programme button 4. On/Off button 5. On/Off indicator Operation Switching on 1. Check that the plug of the connecting cable is in the socket and that the tap is open (if the tap is still closed, the 'quick cycle' indicator will flash).
  • Page 2 CONCISE MANUAL DISHWASHER TFI8014ZT Wash programmes Programme Programme description Normal programme Programme for normally soiled dishes, but also tableware with dried-up remnants such as plates, trays, cups, 50 º glasses, etc. Eco programme For normally soiled dishes. Use this programme is you wish to save energy.

Table of Contents