Download Print this page

Ridgeway Span 400 Instruction Manual

Tower system

Advertisement

Quick Links

Span 400 Instruction Manual
DESIGNATION
SPAN 400 Double Width
CEN designation of this instruction manual
EN 1004 – 3 — 8/12 — XXCD
EN 1298 — IM — en
SPAN 400 Single Width
Rev-01
EN 1004 — 3 — 8/8 — XXCD

Advertisement

loading
Need help?

Need help?

Do you have a question about the Span 400 and is the answer not in the manual?

Questions and answers

Summary of Contents for Ridgeway Span 400

  • Page 1 Span 400 Instruction Manual DESIGNATION SPAN 400 Double Width CEN designation of this instruction manual EN 1004 – 3 — 8/12 — XXCD EN 1298 — IM — en SPAN 400 Single Width Rev-01 EN 1004 — 3 — 8/8 — XXCD...
  • Page 2: Assembly Process

    WARNING NEVER STAND ON AN UNGUARDED PLATFORM SAFE WORKING LOADS AND WORKING HEIGHTS The safe working load at each level of platform is 360kg evenly distributed, regardless of whether one or two platforms are installed. Therefore, even if two platforms are installed side by side, total cumulative load shall not exceed 360kg distributed.
  • Page 3: Usage Advice

    USAGE ADVICE • We recommend a minimum of two people to assemble, dismantle and move the platform tower. • Check that all components are on site and in good working order. • Ensure that the assembly location is checked to prevent hazards during assembly, dismantling or moving and while working on the tower.
  • Page 4: Exploded View

    Check and adjust as necessary to ensure all castors and stabilisers are in firm contact with the ground. • Check that the tower is vertical using a spirit level. • Reapply the castor brakes. EXPLODED VIEW Span 400 - double width Span 400 - single width...
  • Page 5 STABILISERS Fig 2 Fig 3 Fig 4 ALWAYS ENSURE STABILISER SIZE IS CORRECT AND ABLE TO SUPPORT TOWER Lightly tighten the upper clamps above the sixth rung on each corner post. Position the lower clamp above the bottom rung. Ensure the lower arm is as horizontal as possible. Position the stabilisers so that the footpads are approximately equidistant from each other, as shown in Fig.2.
  • Page 6 ALTERNATI E CON I URATIONS Fig 4 Fig 5 BUILD TABLE AD UST ENTS f double width platforms are re uired at all le els, the number of standard platforms in the double width build table should be increased to match the number of trapdoor platforms Fig 6...
  • Page 7 SPECIFIC PRODUCT INFORMATION Table of parts and quantities Span 400 Double Width Towers - 2m, 2.5m and 3m lengths to EN1004 Platform Height (m) Work Height (m) Tower Height (m) Tower Weight in kg (2m in length) Tower Weight in kg (2.5m in length)
  • Page 8 DOUBLE-WIDTH TOWER 6m...
  • Page 9 DOUBLE-WIDTH TOWER 6m...
  • Page 10 DOUBLE-WIDTH TOWER 6m...
  • Page 11 DOUBLE-WIDTH TOWER 5m...
  • Page 12 DOUBLE-WIDTH TOWER 5m...
  • Page 13 DOUBLE-WIDTH TOWER 5m...
  • Page 14 SPECIFIC PRODUCT INFORMATION Table of parts and quantities Span 400 Single Width Towers - 2m, 2.5m and 3m lengths to EN1004 Platform Height (m) Work Height (m) Tower Height (m) Tower Weight in kg (2m in length) Tower Weight in kg (2.5m in length)
  • Page 15 SINGLE-WIDTH TOWER 6m...
  • Page 16 SINGLE-WIDTH TOWER 6m...
  • Page 17 SINGLE-WIDTH TOWER 6m...