Download Print this page

Advertisement

Quick Links

&
INSTALLATION INSTRUCTIONS FOR ALL PET DOORS
DESIGNED IN NEW ZEALAND

Advertisement

loading

Summary of Contents for Pet-tek G-SDD

  • Page 1 & INSTALLATION INSTRUCTIONS FOR ALL PET DOORS DESIGNED IN NEW ZEALAND...
  • Page 2 A circular cut-out is required for the following models, details below: A circular cut-out is required for the following models, details below: G-CD Glass fitting cat door diameter required 245mm suitable for glass 3-10mm thick G-SDD Glass fitting maxi dual glaze diameter required 267mm suitable for glass 3-28mm thick G-SDDSL Glass fitting maxi slim diameter required 267mm suitable for glass 3-20mm thick G-DD Glass Dog door...
  • Page 3 Glass fitting doors must to be installed by a glazier or glass specialist. MEASURING AND MARKING THE LOCATION OF YOUR GLASS FITTING PET DOOR Measure the belly (stomach) height of your pet. For cats, it is normally 100- 150mm. Dogs can vary greatly so it needs to be a height that your dog can access easily. Belly height is the guide along with the practicality of location. Mark this height onto the glass you are installing into. This will determine the bottom of your cut-out.
  • Page 4 ADDITIONAL SECURITY FOR GLASS FITTING DOG DOORS Models : G-SDD and G-SDDSL The G-SDD and G-SDDSL models of small dog door include a security pin in addition to its four way locking system. This can be used when the pet door is in the fully locked position only. The image adjacent shows where the pin is inserted into. Models G-DD and G-DDSL The models G-DD and G-DDSL come with a locking clip feature in addition to its four way locking dials. Two security clips can be attached to the locking dials when the door is in the fully locked position only. The diagrams below show how the clips are used. 1. Clip about to go on 2. Clip going on 3. Clip in place...
  • Page 5 WOOD FITTING DOORS IMPORTANT INFORMATION FOR WOOD FITTING MODELS W-CD Wood fitting cat door (slimline) suitable for wood panels 11-30mm thick W-CDT Wood fitting cat door tunnel suitable for wood panels 11-52mm thick W-SDD Wood fitting small dog door (slimline) suitable for wood panels 11-30mm thick W-SDDT Wood fitting small dog door tunnel suitable for wood panels 11-52mm thick W-UCD Wood fitting upgradeable cat door suitable for wood panels 11-52mm thick W-MCD Wood fitting multi-magnetic cat door suitable for wood panels 11-52mm thick Please note the W-DD has its own specific installation instructions that are on page 7. An appropriate template is supplied for the above doors. MEASURING AND MARKING THE LOCATION OF YOUR WOOD FITTING PET DOOR Measure the belly (stomach) height of your pet. For cats it is normally 100-...
  • Page 6 INSTALLING YOUR WOOD FITTING PET DOOR Position the template at the appropriate height with the bottom of the pet door level (where practical) with the pet’s stomach. Tape the template to the door or panel that you are installing into. Ensure the template is level. With a pencil trace the line to be cut. Fig. 1 below. Cut a 10mm hole on the inside edge of the marked cut out. Carefully cut along the marked line with your jigsaw. Fig. 2 below. Next put the external frame (main body into the hole from the exterior. Place the internal frame from inside onto the external frame.
  • Page 7 IMPORTANT INSTALLATION INSTRUCTIONS FOR: W-DD Wood fitting dog door suitable for wood panels 5-36mm An appropriate template is supplied for this model MEASURING AND MARKING THE LOCATION OF YOUR WOOD FITTING PET DOOR Measure the belly (stomach) height of your pet. Dogs vary greatly so it needs to be a height that your dog can access easily. Belly height is the guide along with practicality of location.
  • Page 8 W-DD Wood fitting dog door installation instructions (cont) Slip the external pet door frame (main body) into the hole from the outside. Next slip the internal frame over the external main frame. This is a slip joint, which allows the frame to be compressed to fit the door thickness. Ensure the screws provided are cut to the correct length. The correct length is door panel thickness plus 12mm. Now screw the internal and external frames together. ADDITIONAL SECURITY FOR THE WOOD FITTING DOG DOOR The wood fitting dog door has a security cover which can be used when additional security is required. The security cover is designed to be used when the door is in the fully locked position.
  • Page 9 TRAINING YOUR PET TO USE A PET DOOR TRAINING YOUR PET TO USE A PET DOOR If your pet has not previously used a pet door it must be trained in order If your pet has not previously used a pet door it must be trained in order for them to become accustomed to it. In general this can take several weeks for them to become accustomed to it. In general this can take several weeks and varies according to temperament. Most pets however are happy to have and varies according to temperament. Most pets however are happy to have freedom of access and will learn to use a pet door. freedom of access and will learn to use a pet door. TIPS FOR TRAINING TIPS FOR TRAINING •...
  • Page 10 MULTI-MAGNETIC MODELS (Collar Key) Information regarding use of multi-magnetic models To use the multi magnetic models your cat needs to have a magnetic collar clip located centrally on its pet collar. The collar key activates the multi-magnetic system within the cat door. No batteries are required. The locking latch depresses and allows entry by your cat, then automatically repositions itself after your cat has entered. The collar key needs to be attached directly onto your pet’s collar. Do not attach rings to your cat’s collar. When using the multi-magnetic door your cat needs to also push the flap of the cat door just in the same manner as the manual models. Magnetic cat doors are recommended for cats from 9 months or older. Do not use on small kittens.
  • Page 11 PET-TEK WARRANTY Thank you for choosing a Pet-tek pet product. All products are carefully inspected prior to leaving the manufacturing plant. We trust that you will have many years of trouble free use of your pet door. Catwalk and Dogwalk pet doors come with a three year manufacturer’s warranty against product malfunction due to manufacturing or parts defects, but not failure as a result of accidental damage, mishandling or abuse. Normal wear and tear is not covered under warranty. Should replacement woven pile be required it can be purchased via your supplier.
  • Page 12 www.catwalk-petdoors.com www.catwalkpetdoors.co.uk...