Table of Contents
Advertisement
W&T
Interface modules
Interface Module USB, #18311
Function
The W&T Interface Module18311 equips devices having a
serial TTL interface with a USB slave interface.
T h e m o d u l e u s e s a n i n t e g r a t e d s e r i a l E E P R O M f o r
non-volatile storage of Vendor ID, Product ID, Serial Number
and a product description. The EEPROM is programmable
on-board via USB.
Current drivers for all supported Windows versions are
available via the Internet on the module data sheet page.
Supply voltage
The USB interface module requires a regulated DC voltage of
5V DC ±5% at typ. 30 mA.
Important installation notes
1
When installing or replacing the Interface Modules you must
visual inspect to be sure that the module is not causing any
short circuit to adjacent components.
Subject to error and alteration
97
Advertisement
Table of Contents
