Vidal Sassoon Glamour Curls VS1273A Instruction Booklet

IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present,
basic safety instructions should always be followed, including the
following:
Polythene bags over product or package may be dangerous. To avoid
danger of suffocation, keep this wrapper away from babies and children.
This bag is not a toy.
DANGER:
When the unit is used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the unit is switched off.
WARNING: Do not use this appliance in or near bathtubs,
showers, basins or other vessels containing water.
• Do not immerse in water or other liquids.
• Do not reach for an appliance that has fallen into water.
Unplug immediately.
• Unit is hot when in use. Take care to avoid contact between the hot
surfaces of the unit and the skin, paying particular attention to the face,
neck and hands.
• The integrated support stand is intended to support the appliance on a
flat surface when the product is switched off only. The appliance must
not be switched on or operated while placed on a surface sensitive to
heat (such as wood or fabric etc).
• This appliance is not intended for use by infirm persons (including
children) with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible
for their safety.
• Children should be supervised to ensure that they do not play with the
appliance.
IMPORTANT: Always unplug the appliance when not in use or before
cleaning. Do not leave unattended when plugged in or switched on. Do
not place on any heat-sensitive surface and always allow to cool before
storing away.
• Do not use any attachments other than those supplied by Conair
Australia Pty Ltd.
• Use this appliance only for its intended use as described within this
instruction booklet.
• This appliance is not intended for commercial use.
• Never drop or insert any object into an opening.
• Never block the air openings of the appliance or place on a soft surface
such as a bed or couch, where the air openings may be blocked. Keep
the air openings free of lint and other debris.
• Attachments may get hot during use. Allow them to cool before handling.
• Do not use outdoors or operate where aerosol (spray) products are
being used or where oxygen is being administered.
• Keep the cord away from heated surfaces.
• Do not use an extension cord with this appliance.
• If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
• After use do not wrap the cord around the appliance as in time this may
cause the cord to fracture. Coil cord loosely by the side of the appliance
in storage.
• Always ensure that the voltage to be used corresponds to the voltage
marked on the unit.
Glamour Curls
Create natural looking voluminous and defined curls with Glamour Curls.
It's a hairdresser's styler with no clamp, simply wrap the hair around the
barrel for fast, easy curls without kinks. Glamour Curls features a ceramic
tourmaline large barrel to provide even heat distribution. The wrap
control feature on the large barrel allows you to style with ease, holding
the hair around the barrel as you wrap.
This sleek curler has an LED variable temperature control 140˚C - 200˚C,
suitable for styling all hair types, giving you the confidence to achieve
your own desired look.
4
1
2
10
8
3
Features:
1. Up to 200˚C professional salon heat
2. 60 second instant heat
3. Small 32mm conical barrel tapering to 19mm
4. Large 44mm conical barrel tapering to 25mm
5. Digital temperature control with 5 variable LED settings: + and -
buttons (from 140˚C - 200˚C.)
6. LED variable temperature display
7. On/off button
8. Cool touch tip
9. Automatic safety cut off system
10. Counter Rest
11. Heat protective finger glove (not shown)
How to use your Glamour Curls
1. Remove all packaging and point of sale labels before use.
2. A plastic cover has been placed over the plug to protect it from
damage during transportation.
Remove the plastic cover from the plug before use.
3. Ensure hair is clean and completely dry before using the appliance.
4. Comb through hair to prevent knots and tangles and then divide hair
into equal sections.
5. Plug the appliance into a power outlet and press the on/off button to
switch the appliance on. The LED display will instantly illuminate, and
at this point the curler will start heating up.
6. Press the '+' or '-' button to adjust the temperature. The display LED
light will change colour according to the temperature you select -
please see "How to use the variable temperature settings" for more
7
5 information. Once the selected temperature stops flashing, the curler
6
has heated and you can begin styling your hair.
To Curl Hair
For best results apply a light styling mousse before styling hair.
1. Take a 2-3cm section of hair, starting 5cm from the scalp.
9
2. Wind the section of hair around the thicker portion of the barrel
towards the cool tip.
3. Hold the end of the hair in place at the cool tip for 5-8 seconds
depending on hair type, and then release. The silicone (large barrel)
wrap control on the barrel will assist to hold your hair in place.
To set the curl, do not brush or comb hair until it cools.
4. Repeat process on additional sections of hair until you achieve the hair
style you desire.
N.B: Some experimenting is necessary when using a curler for the first
time or when changing to a different hair style.
5. Once the hair has cooled, separate curls using fingers for a softer look
or brush out using a comb.
6. To turn the appliance off, press the on/off button. The LED display will
turn off. Allow appliance to cool before storing.
How to Change Styling Heads
The large (25mm - 44mm) barrel is ideal for creating large voluminous
curls. The small (19-32mm) conical barrel is ideal for more defined curls.
You can combine both curls for a more natural look.
To change styling heads:
1. IMPORTANT! The element of the appliance will become very hot
when plugged in and switched on. Before fixing or removing any
attachments, ensure the appliance is cool, switched off and is
unplugged.
2. Turn locking dial to the right to unlock
3. Pull attachment straight off the handle
4. Push other attachment into power handle. The counter rest should be
flush against locking dial and facing downward.
5. Turn locking dial to the left to secure the attachment in place