Summary of Contents for CTT Sport
- Page 1 CTT® MICHAEL AND BART THE CHAMELEON® BELLON® ANNOUNCE THE CHAMELEON® TACTICAL TACTICAL TRANSMITTER - SPORT TRANSMITTER - SPORT Unique on the market: small, waterproof, sophisticated settings, and designed for a hands free experience.
- Page 2 (4 masters). You can pair your following functions: The CTT® Sport is specially designed to be Chameleon® with a CTT® Sport and up to 3 1. an “ON” button practical and easy to use. Modern dog training more independent transmitters that are 2.
- Page 3 Holes for fixation of plate via screws: 4. LED HOLE LED will be GREEN if in loading procedure on induction plate Metal plate that is under the molded injection will affix the CTT® Sport to a strong magnet. A wrench and 5 screws will be provided.
- Page 4 CTT® Display Configuration 1. Speaker icon (tone and vibration as factory setting. This can be changed with USB Emily*) 2. Warning tone 3. Flash, momentary, nick mode 4. Rising Stimulation mode 5. Continuous stimulation 6. Stimulation level 7. Option Dog 1, A 8.
- Page 5 • The Chameleon® can accept 4 ID codes and so can be paired to After pressing a Finger-Kick that is paired to option “P”, all stimulation levels of collar will be deleted. (Only light, tone, vibrations.) The CTT® Sport is fitted with two identification codes and is a one dog system. There are two programmable stimulation options.
- Page 6 THE FINGER-KICK (BLUETOOTH RING/ STIMULATION BUTTON) The Finger-Kick uses the CTT® Sport as a relay for radio transmission so it is important that the Finger-Kick is in the remote’s range (i.e. less than 5 meters). Once the Finger-Kick is successfully paired with the CTT® Sport, the linking is unique and can not disturb another user of similar material.
- Page 7 ON/OFF Press and immediately release the program button to turn on your CTT® Sport. When the CTT® Sport is on, there is information on the display. After you push a paired Finger-Kick one time, the following information will be on the display: 1.
- Page 8 0. 4. To turn off the CTT® Sport, just turn the rotation knob under 0. The display will go blank and the transmitter is now OFF. You cannot turn The display will go blank. The off the CTT®...
- Page 9 • To pair a finger-kick again to the CTT® Sport if you want to go out of SOS function, press and hold the program button for 15 seconds.
- Page 10 Dog 2A, it is automatically paired with option Dog 2B (and vice versa). The Chameleon® can accept up to 4 identification codes. On the CTT® Sport, you can pair your Chameleon® to both identification codes. In this way, you can have up to 2 Finger-...
- Page 11 To program the receiver (Chameleon® or Micro Collar) Why do we want to unpair the CTT® Sport to operate with the CTT® Sport, you need to first turn on from the Chameleon®? the CTT® Sport by pressing and releasing the Program Button.
- Page 12 • the position of the CTT® Sport on the charging plate is not symmetrical (see red dotted line) • The CTT® Sport must be on the LEFT side of the charging plate (where from the backside of the CTT® Sport the two screw holes for the fixation plate on the right side of the CTT®...
- Page 13 (As you can see, the CTT® Sport is on the left side of the charging plate; it is NOT centralised on the charging plate.) The LED on the CTT® Sport will be green if the CTT® Sport is charging. If the CTT® Sport does not need charging, no light will be illuminated.
- Page 14 SOS FUNCTIONING If we are without a Finger-Kick, we can use our CTT® Sport in SOS How to Set the CTT® Sport on SOS Mode How to Re-Install Finger-Kick Press and hold the program button for 15 seconds. (The Connection display will go twice through setting modes.) When the...
- Page 15 Notes: My CTT® Sport chip number: My Chameleon® chip number:...
Need help?
Do you have a question about the Sport and is the answer not in the manual?
Questions and answers