Huanso CT568W Quick Manual

Android iOS
Quick Guide
V160217-1
Warning: Before you use the device, make
sure device is worked in below
environment, or it can't work properly.
Environment Support Don't support Solutions
1 , U s e r c a n c o n n e c t d e v i c e t o 5
smartphones to in case 1-2 smartphones
3G/4G signal ≤50%,
a r e i n p o o r s i g n a l a r e a , o t h e r
3G/4G signal ≥75%

3. Connect the Device

long delay or can't view video. smartphones can still ring and view.
2, User better to connect smartphone to Step 1: Insert TF memory card and fix
WiFi when there is WiFi available.
a n t e n n a , c o n n e c t p o w e r
5GHz WiFi. supply. It takes 30 seconds to
2.4GHz WiFi. Change to use 2.4GHz WiFi.
Device can't connect.
start device.
1, Reduce the computers/smartphones
<512KBit/s or too many
quantity connected in the same network. Special Notice: Do not connect the
computers/smartphones in the
Upload bandwidth≥512KBit/s
same network. 2, Change to use a bigger bandwidth network cable, otherwise, the device
Delay or can't work. network. cannot set the Wi-Fi by scanning QR
code.

1. Introduction

Step 2: Connect your mobile phone to your router to register a user ID.
Register by E-mail:
Door phone 1. Input your e-mail
power supply (DC12V 500mA)
IR LED light
Tamper switch
Antenna
LENs Power in DC+(12V)(Red)
Reset
Power in DC-(12V)(Black) Lock
Lock Power
Lock Relay COM(Yellow) supply
Speaker
Thread hole Lock Relay NO(Purple)
Doorbell
Doorbell Relay COM(Gray) Doorbell
Power supply
Doorbell Relay NO(White)
Net RJ45( Orange&White)
CDS Sensor 1
2
Net RJ45( Orange) 3
6 2. Input your ID
4
Ring Button Microphone Net RJ45( Green&White) password
5
Net RJ45( Green) 7
8

2. Install the App

Download the App 'SafeSmart' from 'Google Play Store' or 'App Store', and install
Special Notice: If 2 mobile phones use the same account ID to login at the same time, only 1
on mobile phone. mobile phone can receive the push notification alarm ring. So if use 2 mobile phones to
connect the device, user should register 2 different account IDs for the 2 mobile phones.
Special Notice: When open the app, you will receive a tip. Please click 'OK' to
Step 3: Connect your mobile phone to your router.
allow the notifications, otherwise, you cannot receive any notification.
Special Notice: Device don't support 5Ghz WIFI,user should use 2.4GHz WIFI to connect.
1
Wifi name Step 4: Add device. In 'Device List', slide down to find device.
! Set device's wifi by scanning QR code.
NOTICE:
NOTICE:
1. Slide down to
refresh and find
device.
For the first time installation, Input your wifi 2. Click to add
device
please tap 'OK'. Otherwise you password, then
can't receive any notification.
tap 'Next'.
!
NOTICE:

4. Add device to another mobile phones.

Device will have 'Di.Di.Di.Di....' sound noticing user to scan Wifi QR code.
Antenna
Scan QR code to set Wifi can be scanned only once. If user need to add device to other
Special Notice: If device have no 'Di.Di.Di.Di....' sound means the device has mobile phones, user don't need to scan Wifi QR code again. User should press the
scanned before. User should press the reset button for 5 seconds until hear button in the 'device list' to enter 'Add Devices' interface, press 'Manual' button and
Power adaptar
'KING' and scan after hearing the 'Di.Di.Di.Di....' notice sound. input device ID and password to add device.
Aim the device at your smart phone's QR code in 10-15cm distance (iPad and
tablet are 20cm). Once hear the sound 'DING', click 'Heard', it shows 'Setting
Success', device is connected to the Wi-Fi.
Please Remember your ID
Note: Device ID is in 'Device List->Device->Edit' as below.
" DING "
A f t e r y o u h e a r
the sound 'DING'
Special Notice: Device is designed not able to scan QR code for 2 times. If want
to change Wifi in another place, user should press the reset button for 5 seconds
until hear 'KING' and scan after hearing the 'Di.Di.Di.Di....' notice sound.
3
2

5. Date and Time

In "Device List-Device-Setting-Date and Time", choose your Time Zone, and check if the
new time is right or not. If time is right, press apply to get network time automatically.
2 3. Input your
Remark: Time zone example: China UTC+8
device name
Germany/France/Spain/Poland/Italy/Netherlands/Norway/Sweden UTC+1
UK/Portugal/Ireland UTC+0 Turkey/Romania/Finland UTC+2
Mexico UTC-6 Colombia/Ecuador/Peru UTC-5
1 Venezuela/Chile/Manaus UTC-4 Agentina/Uruguay UTC-3
4 . I n p u t y o u r
device password,
then tap 'Save'.
NOTICE:
If fail to scan the QR code, you could reset the device and retry. Or
connect wifi by using network cable. More details please refer to PART9
& PART10.
2. Check time
is right or not
1. Set Time Zone
3. Click to confirm

6. Push Notification Ring

In order to receive the push notification from the device, you should turn on 'Alarm Push'.
Step 1:
4
Step 2: When people press the call button of the device or trigger the alarm, there
will be a notification received on the mobile phone screen. For Android,
press 'check' to view. For iphone, slide and press 'view' or to view.
Android iOS
Slide to view
NOTICE: User must keep the app running at phone's background, user
! can't force stop the app in phone's application manager, otherwise
NOTICE: phone can't receive any push notification.

7. View Interface

Date and Time Step 2: Playback.
view playback.
This button is no
Notice: If you choose 'Alarm Recording' and choose record time 1/2/3 minutes,
u s e f o r t h i s
device. But this you should wait 1/2/3 minutes untill the record finished to see the latest file.
View HD image at
device is a part
of smart home 1280*720
s y s t e m , t h i s
View clear image at
button is to used
to control smart
640*360
home system.
View smooth image at
!
320*180
NOTICE:
Press and hold for
NOTICE:
3 s e c o n d s t o
unlock. Then you
had to wait for 6
seconds to unlock
again. Audio Snapshot Hangup Hear/Talk Button

8. Video Record and Playback

By tapping this icon, you
can delete the ID which Step 1:
Start recording. Insert the TF card (DO NOT insert or remove TF card when
n o n e e d a l a r m p u s h .
device is power on). Enter 'Device list→ Device→ Setting→ Storage Info' The recorded video can only be playback online, it is not possible to be saved into
One device can push
phone album or sending email. User can also take the TF card to slot into computer to
Click 'Erase SD Card' to format SD card. In 'Device list→Device→Setting→
alarm to 5 IDs at most. copy the recorded video.
Record settings' choose Record type and Record Time.
5 6

9. Media Settings

1 . C h o o s e ' A l a r m Video Format：Set video output format PAL/NTSC.
R e c o r d i n g ' t o Volume：Set device's speaker's volume. Note: No duplex device not supports this.
record when visitor Image Reverse: Set video reverse.
press ring button or
Notice: First time use this functino user should press distable and then press
sensors triggered.
enable again to reverse image.
2.Choose the

10. Motion Detection Email

r e c o r d i n g
time.
Step 1, In 'Device List->Device->Settings->Alarm Settings', Enable 'Motion Detection'.
Step 2, Click 'Alarm Email' and input email address.
Step 3, In 'Device List->Device' switch the defence icon to Enable
setting, if motion detection is triggered email will be sent.
In 'Device list→Device→Playback', chose the video file to
Notice: All 3 steps should be set, or this function can not work.

11. Motion Detection Buzzer Alarm

Step 1, In 'Device List->Device->Settings->Alarm Settings', Enable 'Motion Detection'.
Step 2, Enable Buzzer.
Step 3, In 'Device List->Device' switch the defence icon to Enable
setting, if motion detection is triggered buzzer will alarm.
7
After above
A f t e r a b o v e
8