Rs-232 Configurations; Rs-232C Configurations - Runco CR-40HD Owner's Operating Manual

RS-232 Configurations

RS-232C Configurations

1 2 3 4
Pin 1: Ground
Pin 2: TxD
Pin 3: Ground
Pin 4: RxD
Note: • All commands are in ASCII format
• Default baud rate is 115200,8,N,1, but can be changed (see page 26)
• No carriage return is necessary
For an added convenience, an RJ-11 to DB9 (Male) adaptor is provided but is not
required. If the adapter is used, use a null-modem cable.
The pin configuration on the adaptor is as follows:
No. Pin Name
1 No Connection
2
RXD (Receive data)
3
TXD (Transmit data)
4 No connection
5
GND
6
No connection
7 No connection
32
No. Pin Name
8 No connection
9
No Connection
2 3 4 5
1
7 8 9
6