Doss ANC BE2 User Manual

Get Start
Congratulations! Thank you for choosing DOSS ANC BE2
BT stereo headphone. We are encourage you to read this
manual guide thoroughly to get most out of the innovate
BT stereo headphone

Features

1. BT 4.1+EDR
2. 3.5mm music line-in function
3. The headphone battery power status shows on iOS
4. aptx audio technology

Connection Diagram

DOSS ANC BE2
volume Up
Reject Call/Transfer Call
User Manual
Previous
LED lndicator
Micro USB Slot
Turn on/off
Mic
3.5mm Audio Jack Volume Down Pairing Mode/
Play/Pause
Next
Answer Call/End Call/
2
What's in the Box
NOTE: In Bluetooth mode, if there is no audio input over 6
seconds, the speaker would automatically switch to power
1. 1 X Stereo BT headphone DOSS ANC BE2
saving mode. A 5-second buffer would be needed if there
2. 1 X Micro USB charging cable
comes audio input again.
3. 1 X User manual
4. 1 X 3.5mm audio cable Previous: Short press the button "<", music turns
5. 1 X Storage bag
to previous song .
Next: Short press the button ">", music turns to next song.

How to Use

Answer Call: Short press the button"
incoming call.
1. General Function
End call: Short press the button"
Operation
L E D S tatus
P o w er o n
Reject call: Press the button "+" for 2 seconds to reject
Power on B lue LE D flashes 2 times
P o w er off
Power off R ed L E D flashes 2 times the call.
P airi n g
Pairing R ed L E D & B lue LE D flashes alternately
Transfer call: During the call , press the button "+" for 2
Standby B lue LE D flashes 3 times in 5 seconds seconds to switched to mobile phone. Press it again for 2
Incoming call Blue LED slow flash
seconds to switched to headphone.
Low battery R ed L E D flashes 2 times every 2 seconds
Auto power off: Headphone will auto power off without
Red LED keeps lighting during charging
Charging connecting in 30 minutes.
Blue LED keeps lighting charging finished
3.Connect Headphone with Devices via 3.5mm Audio Cable
2. Basic Buttons Operation
Tips: Please adjust the volume on your device in need while
Power on: Press the button"
"for 2 seconds.
using 3.5mm audio cable.
Power off: Press the button" "for 3 seconds.
Volume adjust: Press the button"+" to increase the volume.
Press the button "-" to decrease the volume .When volume
reaches to maximum or minimum,"Tick"reminding voice
occurs.
3.5mm Audio Cable
Play/Pause: Short press the button button" "to pause.
Press it again to continue.
3
4

6.Specification

4.Connect the Headphone with Devices via Bluetooth
BT version:
1. Make sure the headphone is power on.
Music play time:
2. Press and hold the the button" "for 5 seconds till the red
Max operation range:
and blue led flash alternately to enter into the pairing mode. Supported Bluetooth profiles:
Electrical impedance:
3. Discover"DOSS ANC BE2"on your Bluetooth list.
Sound pressure level:
4. Enter"0000"as the PIN if your mobile phone reminds.
Frequency response:
5. If the pairing is sucessful, the the LED will change to fast
" to answer the Net weight:
flashing every 5 seconds, if the pair is failed, please repeat
Dimension:
steps 2 through 3 again.
" to end the phone call Input:
Battery type:
5.Active Noise Cancellation Function(ANC)

Warning

Use the included charging cable or the cable from
qualified manufacturer to charge the headphone.
Do NOT drop, hit or shake the device.
Do NOT disassemble, repair or modify the headphone
by yourself.
Do NOT use cleaning products that contain benzene,
solvents or alcohol.
Do NOT expose the headphone to excessive heat or direct
sunlight for long periods of ttime
Short press the button " NC" to cancel the background noise,
Do NOT store the device in a place with humidity or dust.
which can remove the noise up to 90% under the low
Do NOT place heavy objects on top of the headphone.
frequency, provides you excellent sound quality.
Do NOT use near a microwave oven or wireless LAN products.
5
V4.1
20 hours
10 meters
A2DP/ AVRCP/ HSP /HFP
32Ω
115±3dB
20Hz---20KHz
270g
190 x 164 x 75mm
—
5V - -- 1A
Li-ion 3.7V, 450mAh
Email:Support@dossav.com
Website:www.dossaudio.com
Made in Shenzhen,China
6 7