Advertisement
Quick Links
Advertisement
Summary of Contents for Netafim ICU
- Page 1 NETAFIM ICU - INTERNET CELLULAR MODEM • Real Port Installation • ICU Connections Netafim USA CMT...
- Page 2 • CD with Instructions and PC software Important: The ICU Modem is ready to use. It is pre-configured by Netafim USA and includes a Verizon Cellular Data Plan with Static IP Address. The account will to be transferred to the customer within 30 days of plan activation.
- Page 3 NETAFIM ICU CELLULAR MODEM Additional Items - Order Separately: • External antenna for Cellular Modem Model Number 00107-004970 6 ft. Cable with 9DB female 9 pin plug for NMC • Controllers - direct communication Model Number 00107-011205 • NMC Pro Communication Radio Card RS232...
- Page 4 The Real Port is a PC software that creates a Virtual Com Port on your PC. The IP Address of the ICU will be assigned to this Virtual Com Port. The Cellular Modem connected to your NMC Controller will select one of the Com Port numbers not in use and this will be the Virtual Com Port.
- Page 5 REAL PORT SOFTWARE INSTALLATION 1. Insert the Netafim CD and open the Real Port File 2. If your PC has 32 Bytes run the Setup32.exe file and if your PC has 64 Bytes run the Setup64.exe file 32 Bytes 64 Bytes...
- Page 6 REAL PORT SOFTWARE INSTALLATION On Set-up Screen select “Add a New Device” Click “Next”...
- Page 7 COMPUTER PORT SET-UP Select “IP” Com 2 Type in Static IP that is on the ICU modem white label Select a Comm Port that is not in use (this Com 2 port will show up in NMC Net) All other information on this screen is...
- Page 8 CHECKING COM PORT PC ALLOCATION This step is only used to verify that the Real Port is set up correctly. Skip this or use to troubleshoot. On the PC find the “Device Manager” and Click the Hardware Tab Click the “Device Manager”...
- Page 9 Skip this or use to troubleshoot Expand “Multi-port Serial Adapters” Right Click on “Standard Real Port” Select “Properties” Click on “Advanced” Connections will show the Real Port status. “Connected” means that the Real Port is communicating with the Netafim ICU Cellular Modem.
- Page 10 NETAFIM ICU CELLULAR MODEM Connections between the ICU Cellular Modem and the NMC Controllers ICU Modem 1. Connect the antennas to the modem. When the external antenna is required, it needs to be connected on the Primary Cellular. 2. Connect the Netafim Direct Plug to the modem 3.
- Page 11 NETAFIM ICU CELLULAR MODEM Connections between the ICU Cellular Modem and the NMC Controllers NMC Pro or NMC DC Controller 1. The Communication card RS232 needs to be installed in the NMC Controller 2. Verify that the 4 Jumpers are on DIR position (upper and middle pin) 3.
- Page 12 NETAFIM ICU CELLULAR MODEM Connections between the ICU Cellular Modem and the NMC Controllers NMC Jr. Controller 1. The Communication card RS232 needs to be installed in the NMC Controller. Note the Left- Right direction on the card. 2. Verify that the 4 Jumpers...
- Page 13 NMCNET PC SOFTWARE The PC will need to run the NMCNet PC Software to communicate and interact with the NMC Controller. See the NMCNet User Manual for instructions on NMCNet installation. For Technical assistance please call your local Netafim Dealer...