Getting Started - Omega Altise OCM203O Operation, Maintenance And Safety Instructions

GENERAL HEATER PARTS

GETTING STARTED

1. Carefully remove the heater from the plastic bag and the carton, and unwind the cord to its full length.
2. Place the heater onto a stable, flat and dry surface. Do not place the heater directly on carpet as the heat
generated may damage some carpets.
3. Set the Function Select Switch to the off position (fully anti-clockwise). Plug the cord set into a
230-240V~A.C. 50Hz earthed electrical outlet. Turn the power on at the electrical outlet.
PLEASE NOTE: The heater will only operate if the thermostat control is set to a higher temperature than the
temperature of the room it is in.
OMEGA ALTISE