Contents Warnings Care and Maintenance Getting to Know your Orb Highchair Highchair Installation Highchair Function Disassembly Infant Inlay Warranty EN14988-2 / AS4684-2009 / ASTM F404...
WARNINGS! IMPORTANT! KEEP FOR FUTURE REFERENCE WARNING! DO NOT LEAVE THE CHILD UNATTENDED WHILST USING THE HIGHCHAIR. WARNING! MAKE SURE THE HARNESS IS CORRECTLY FITTED. WARNING! BE AWARE TO THE RISK OF OPEN FIRE AND OTHER SOURCES OF STRONG HEAT, SUCH AS ELECTRIC FIRES, GAS FIRES ETC. IN THE VICINITY OF THE HIGHCHAIR.
• Never move the highchair whilst the baby is inside it. • This highchair is only intended for use of one baby at time. • When the highchair is not being used, store out of reach of babies and young children. •...
PART 1 : HIGHCHAIR INSTALLATION Step 1: Base Assembly Step 2: Seat Installation 1. Raise tube A, pull tube B along A until you 2. Insert seat unit (A) hear a “click”. into the axle of the base until the two round plastic joints close completely.
Page 9
Step 3: Food Tray and Harness Installation 3.1 Insert D into E whilst keeping the crotch strap pulled taut upwards. 3.2 Insert A onto the small bar on part B, press A into B until they lock together. Check they are locked in properly by pulling on the footrest tube.
PART 2 : HIGHCHAIR FUNCTION Function 1: Using the Harness (A) Slot waist clip into crotch strap buckle until you hear a “click”. (B) Clip shoulder harness connector on to the waist harness bracket. (C) Adjust length of waist, crotch and shoulder harness to desired position, ensuring your baby is safely strapped in to the highchair.
Page 11
Function 4: Seat Rotation The direction of the seat can be rotated 360 degrees and locked into to 2 positions. Firmly press down the revolving button (F) and rotate the chair, release revolve button on desired position. Ensure the seat unit is clicked into place. Function 5: Seat Recline Function 6: Food Tray Adjustment Pull tray adjustment levers (H)
Page 12
PART 3 : DISASSEMBLY Step 1: Seat Disassembly Press seat dismount button (A) and remove the seat. Step onto the base of the highchair whilst removing the seat unit as shown on page 5. Step 2: Folding the base Pull height adjustment button (A) outwards. Slide the rear leg (B) down until flat.
Step 3: Food Tray Disassembly (A) Press tray plugs on both sides simultaneously and pull the food tray outwards from the tray sockets. Step 4: Footrest Disassembly (A) Pull footrest hook downwards and release the food tray/footrest from the seat unit.
PART 4: INFANT INLAY If you have purchased the Orb+ Highchair, please follow the instructions below for safe use of the supplied infant inlay. Step 1: Fitting the inlay Unfasten the harness and place the infant inlay on the seat of the highchair.
WARRANTY We guarantee that this product was manufactured in accordance with the current European safety requirements and quality standards which are applicable to this product, and that this product is free from defects in workmanship and material at the time of purchase. During the production process the product was subjected to various quality checks.