Advertisement
Table of Contents
Setup instructions:
1. Plug in power. Power indicator light will be illuminated.
2. Plug the ventilator to the RCM via the USB cable provided.
The signal light will illuminate when communication is achieved.
If the error light is illuminated, contact your Home Care Provider.
3. Unplug the USB cable from ventilator.
4. Once you are unplugged, your ventilator is mobile.
ResMed Ltd
Distributed by
1 Elizabeth Macarthur Drive
ResMed Corp 9001 Spectrum Center Boulevard San Diego CA 2123 USA
Bella Vista NSW 2153
Australia
Oxfordshire OX14 4RW UK
See ResMed.com for other ResMed locations worldwide. AirView, Astral and Stellar are trademarks and/
or registered trademarks of the ResMed family of companies. For patent and other intellectual property
information, see ResMed.com/ip. © 2016 ResMed Ltd.
ResMed.com
ResMed (UK) Ltd 96 Jubilee Ave Milton Park Abingdon
278185/2 2016-05
278185
Quick setup guide
(RCM1)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ResMed RCM1
Summary of Contents for ResMed RCM1
-
Page 1: Setup Instructions
Oxfordshire OX14 4RW UK See ResMed.com for other ResMed locations worldwide. AirView, Astral and Stellar are trademarks and/ or registered trademarks of the ResMed family of companies. For patent and other intellectual property information, see ResMed.com/ip. © 2016 ResMed Ltd. - Page 2 Read your entire RCM User Guide before use. Mobility For Setup instructions refer to the next page...
Need help?
Do you have a question about the RCM1 and is the answer not in the manual?
Questions and answers