Related Manuals for WalimeXPro LED 500
Summary of Contents for WalimeXPro LED 500
- Page 1 Copy of Instruction Manual LED 500 Fluorescent Light Gewerbering 26 86666 Burgheim Tel. +49/84 32 / 9489-0 Fax: +49/84 32 / 9489 - 8333 eMail: info@foto-walser.de www.foto-walser.de...
-
Page 2: Table Of Contents
Content How to understand the instruction manual ............ 4 Markings on the device ..................4 Markings in this manual ..................4 Important safety notes .................. 4 Unpack and check the device ................. 6 Overview about the parts ................7 Quick start guide ................... 7 Preparation for operation ................ - Page 3 Thank you very much for your confidence. We wish you much pleasure and success with your new device. The LED 500 Fluorescent Light is equipped with long-living, energy-saving LED. The Light is especially developed for ambitious beginners and professional users in film and studio photography. It is characterized through its longevity, stable colour temperature and constant luminance (without flickering).
-
Page 4: How To Understand The Instruction Manual
How to understand the instruction manual Markings on the device This marking means, that your device meets the safety requirements of all relevant European Directives. This marking means, that your device should be disposed in the local disposal points. Markings in this manual Marking Meaning Indicates the handling and consequences of safety... - Page 5 WARNING Danger of electric shock, fire through short-circuit A short-circuit could be caused through defect cables and through humidity or moisture. A short- circuit can warm up the conductors, so that there isolation will melt or even melt thoroughly. This could lead to fire.
-
Page 6: Unpack And Check The Device
− Don´t touch the lamps with bare hands. Just touch the lamp at the plastic socket or wear clean cotton gloves or use a clean cloth. − Avoid touching the flash tube accidentally when mounting or changing accessories. Unpack and check the device •... -
Page 7: Overview About The Parts
Overview about the parts Housing 2. Handle 3. On/Off tappet switch 4. Connection for power cord 5. On/Off Switch Lamps 6. Adjustable Lamp Socket 7. Fuse Holder 8. Barndoors 9. LED Quick start guide ADVICE: The detailed instruction for the following operations can be found in the respective chapters in this instruction manual. -
Page 8: Connect To Power Supply
WARNING Select a tripod of suitable weight and dimensions. See Technical Specifications. Make sure, that the tripod with the mounted device has a tilt and skid resistant stand. 1. Loose locking knurl. Mount the device with the holder on the tripod. Tighten locking knurl. -
Page 9: Solve Problems
• Clean the device if necessary. See Cleaning. • Put the device and all demounted elements in one carton and carry and store them according to the requirements in the technical specifications. See Technical specifications. Solve problems Problem Possible reason Remedy Plug in the power cord correctly Device is switched on,... -
Page 10: Change Lamps
LED 500 Fluorescent Light Cleaning Use a microfiber cloth to remove light and Housing stubborn dirt Wipe off with dust brush or dry, soft cloth Lamps ADVICE: Don´t clean the lamps with water. Even small residues on the lamps could lead to bursting... -
Page 11: Disposal And Environment Protection
13. Disposal and environment protection Your device should be disposed free of charge at the local disposal points. 14. Technical specifications Device Micro-fuse Power supply AC 220 - 230 V / 50 Hz Weight approx. 3,0 kg Vertical pivoting radius 180 °...
Need help?
Do you have a question about the LED 500 and is the answer not in the manual?
Questions and answers