Table of Contents
Advertisement
Quick Links
Any audio system can be a distraction to the driver
and/or passenger. Please use caution when
playing your stereo, especially in traffic.
UTV 1
Installation Manual
Please take a few minutes and read this manual BEFORE starting
the installation! This manual is not "vehicle specific", so reading
before starting will help you choose good mounting locations,
and help plan your wiring.
Metrix Audio and Hogtunes Inc. are Owned by Powersports Audio Inc., Barrie, Ontario, Canada
All Products Designed and Engineered In Canada
Part # UTV 1 Manual (Rev A)
Advertisement
Table of Contents
Summary of Contents for Metrix Audio UTV 1
- Page 1 Metrix Audio and Hogtunes Inc. are Owned by Powersports Audio Inc., Barrie, Ontario, Canada All Products Designed and Engineered In Canada Part # UTV 1 Manual (Rev A)
-
Page 2: Warranty Information
Warranty Information: Congratulations and thank you for your purchase of the Metrix Audio UTV 1 kit! Since positive word of mouth is the best way to grow our business, we want your new system to work as well as it was designed to. If you have any questions or concerns, Metrix Audio’s UTV 1 kit is warranted for a period of 24 months from the... - Page 3 Blue: The Blue wire on the BT-1 will be connected to the blue wire on the Element X amplifier later on in the installation. The blue wire on BT-1 is the “remote turn on lead”. (When Used In UTV 1 Kit) When BT-1 is turned on, the blue wire “tells” the Element X amplifier to turn on.
- Page 4 E = Fuse Holder On Yellow Wire With 2A Fuse (Max) Metrix Audio’s Element 1 Speakers are 4 ohm, 5”x 7” 2 way speakers that went through hours of rigorous testing with 100 watts of RMS power applied. The speakers F = 3.5mm Male Low Level Output (To Amp)
- Page 5 Top Clamp With everything properly secured, the system is now ready to enjoy! Rubber Clamp Inserts UTV 1 Basic System Flow Chart Bottom Clamp Bottom Clamp Bolt Speaker Placement: Take a few moments and hold a single speaker up to the machine so you can see a good place to attach them.
- Page 6 “discoverable”. In the list of available devices, look for “Metrix Audio UTV” and select that. Once paired, the led on BT-1 will stay on solid. Once initially paired, BT-1 will auto pair to your device.
Need help?
Do you have a question about the UTV 1 and is the answer not in the manual?
Questions and answers