EMS stands for electrical muscle stimulation. This electric muscle stimulator is used to stimulate healthy muscles to improve muscle strength and performance. Indications for Use The PlayMakar Pro Strength & Recovery System is a muscle stimulator for active treatment as per intended use: ®...
EMS PROGRAMS ……………………………………....................................................... 25 POD CHANNEL PAIRING (FOR ADVANCED USERS)........................................26-27 TECHNICAL SPECIFICATIONS ……………………………………………………..........................................28-29 TROUBLESHOOTING.………..……………………………………………….…..............................................30-31 RADIO FREQUENCY WIRELESS INFORMATION …………………………………………………................................32-33 INFORMATION ABOUT ELECTROMAGNETIC COMPATIBILITY ………................................34-37 FCC INFORMATION ………………………………………………………………..............................................38 WARRANTY…………………………………………........................................................39 REGISTER YOUR DEVICE …………………....................................................41 www.PlayMakar.com...
• Do not place the electrode pads over any recent scars, broken, or inflamed areas of infection or susceptibility to acne, thrombosis or other vascular problems (e.g. varicose veins), or any part of the body where feeling is limited. www.PlayMakar.com...
Page 5
It might result in burs at the site of the stimulator electrode pads and possible damage to the stimulator if you connect to high frequency equipment. • Application of electrode pads near the thorax may increase the risk of cardiac fibrillation. www.PlayMakar.com...
Page 6
Isolated cases of skin irritation may occur at the site of electrode pad placement following long-term application. • Place electrode pads in accordance with illustrations on page 23 in this instruction manual. www.PlayMakar.com...
Page 7
The device is not intended for medical use for the treatment of any medical condition or for any permanent physical changes. • Contact PlayMakar Inc. or an authorized reseller if your unit is not working correctly. Do not use in the meantime. • An effective session should not cause discomfort.
Page 8
Do not use this system when driving, operating machinery, or when swimming. • Before removing the electrode pads, be sure to power off device to avoid unpleasant stimulation. After Strenuous Exercises or Exertion: • Always use lower intensity levels to avoid muscle fatigue. www.PlayMakar.com...
Page 9
Do not touch the electrode pads or metal studs while the unit is switched on. • Do not use this system if you are wearing a belly button ring. Remove ring before session. • Use the device with only with electrode pads and accessories provided by PlayMakar with your device. ® •...
Page 10
This system may be used daily with no operation time limit, but it is recommended to not exceed 60 minutes per day. • If there is any other problem, please consult ExcelHealth or return the device to an authorized PlayMakar reseller. Do ®...
3. If LED in orange is flashing, battery power is low. Receiver pod will turn on when charging the battery. Orange light will remain until fully charged, then turns off. www.PlayMakar.com...
When discarding or recycling batteries, make sure not to short circuit (+)(-) the terminals. • Please recycle. Do not dispose of old batteries with your household waste; dispose of them safely at your recycling center or business where the batteries were purchased. www.PlayMakar.com...
Note: You may not use the remote while it's charging. When charging, the remote will turn off automatically. Note: Do not charge receiver pods with electrode pads snapped on to the receiver pods as it will reduce longevity of the electrode pads due to excessive heat from charging. www.PlayMakar.com...
Page 15
3. Battery symbol will be flashes/sec. flashing, 1 flash/sec. like the sequence shown below: (disappear) Remote Done Charging 1. When the device is done charging, the full battery symbol will show on the LCD screen and will not be flashing. www.PlayMakar.com...
Page 16
RECEIVER POD BATTERY STATUS Receiver Pod ON Receiver Pod Low Battery Receiver Pod Battery Depleted Light Blinking Receiver Pod Charging Receiver Pod Done Charging Orange Light On Light Off www.PlayMakar.com...
5. When removing electrode pads, always remove by pulling in the direction of hair growth. 6. It may be helpful to apply PlayMakar After Use Electrotherapy Lotion on electrode pad placement area when system is ®...
Note: Do not turn the remote on until the receiver pod(s) are properly attached to electrode pad(s). Note: When stimulating the muscles of the arms or legs, muscle contraction may cause involuntary limb movement which may cause injury to yourself or others. Ensure limbs are secured to prevent movement. www.PlayMakar.com...
6 EMS programs; the programs differ with respect to varying pulse widths and frequencies. The program you choose determines the impulse output type. Choose the program that is appropriate to your needs as shown on page 24 and 25 or is most comfortable to you. www.PlayMakar.com...
You can use this as a guide to select an intensity level that is comfortable for you. Note: If you change therapy mode/program during a therapy session, the intensity level will reset to “0” to avoid unpleasant and unexpected impulses; it's a safety and precautionary feature. www.PlayMakar.com...
Note: Electrode pads are for single person use only. If you have questions about the integrity of the electrode pads or if you want to order new electrode pads, please order online at www.PlayMakar.com or call us at 833-PLAY-MAKAR. Rechargeable Battery Care The rechargeable batteries are built-in the device(s).
Page 22
Remote: 8-10 Hours If you find that the battery cannot charge effectively or if the fully charged battery can only be used for a very short time, please order replacement units online at www.PlayMakar.com or call us at 833-PLAY-MAKAR. Storing Your System Store your system at room temperature in a dry place, out of the reach of children.
ELECTRODE PAD PLACEMENT SUGGESTIONS Hamstring Shoulder Lower Back Calf Upper Back Thigh Go to playmakar.com/electrode-placement/ for more pad placement suggestions. www.PlayMakar.com...
For symptomatic relief and Variable comfortable tingling and pulsing sensation (sensation should management of chronic, intractable appear to come in waves). Pain should ease and there should be relief pain and relief of pain associated with after treatment. arthritis. www.PlayMakar.com...
It improves their anaerobic capacity and separated by longer relaxation phases. Strengthening is used for improving maximum muscle strength. Increase the stimulation intensity level until you get a strong and deep contraction. Do not exceed your comfort level; 20 min/duration. www.PlayMakar.com...
(CH1, CH2, CH3, CH4). Once you have selected the channel, then press SET button. Note: When the receiver pod(s) are paired, the button on the pod(s) will blink twice, which means that the channel pairing was successful. The LCD on the remote will display SS. www.PlayMakar.com...
Page 27
STEP 3 - Press SET on remote to adjust mode, program, and intensity level by channel pod(s). See steps 6-9 on pages 19-20 to complete the set-up. Note: If you have programmed your pod(s) to a different channel other than CH1, use the adhesive labels provided to mark the pod's channel on the pod(s). www.PlayMakar.com...
• Essential Performance: The stimulation output as defined in the following specification table for TENS & EMS. TENS Programs Program Pulse width(uS) Frequency(Hz) Function Mode Constant Burst Constant 260~156 2~60 Modulation 260~156 Modulation 7~60 Modulation 260~156 Modulation 2.45~245 Cycle www.PlayMakar.com...
Page 29
Operation Altitude: 3000m • Operating Atmospheric Pressure Range: 700~1013 hPa • Transport and Storage Atmospheric Pressure Range: 500 ~ 1060 hPa There are a number of technical symbols on your system, explained as follows: Remote Label Receiver Pod Label www.PlayMakar.com...
2. If you have used advanced pairing option, press CH button on remote to navigate to respective pod. (See pages 26-27) 3. Set receiver pod by adjusting intensity. (See page 20) If intensity is not increased- beyond "0", receiver pod will shut off automatically after 3 minutes of inactivity. www.PlayMakar.com...
Page 31
Interference may occur in the vicinity of equipment marked with the following symbol. Ingress Protecting Rating IP22 The symbol on the device means it is protected against hazards from entry of objects larger than a finger and vertically falling water drops when tilted at 15 degrees. Stand-by. www.PlayMakar.com...
This symbol means “use before”, represented as “YYYY-MM” (for year and month). RADIO FREQUENCY WIRELESS INFORMATION Radio Frequency Wireless technology is used in the PlayMakar Pro Strength & Recovery System. ® For communication between the remote and the wireless receiver pods the wireless protocol characteristics...
Page 33
Wireless Security Measures Device Identification 8 bits, shared only with other PlayMakar devices. ® Data Integrity Checks Each data frame is protected by a 16 (b) length CRC. Acknowledgment Each point-to-point communication is acknowledged. Out of range behavior • Remote can’t operate on the receiver pods.
RF disturbances are controlled. The customer or the user of the system can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and the PlayMakar Pro Strength & Recovery System as recommended on next page, according to the ®...
Page 35
The PlayMakar Pro Strength & Recovery System is intended for use in the electromagnetic environment specified below. ® The customer or the user of the PlayMakar Pro Strength & Recovery System should assure that it is used in such an ®...
Page 36
Table 3 Declaration – electromagnetic immunity The PlayMakar Pro Strength & Recovery System is intended for use in the electromagnetic environment specified below. ® The customer or the user should assure that it is used in such an environment. Immunity test...
Page 37
NOTE: U is the a.c. main voltage prior to application of the test level. Table 4 Declaration – electromagnetic emissions The PlayMakar Pro Strength & Recovery System is intended for use in the electromagnetic environment specified below. ® The customer or the user of the system should assure that it is used in such an environment.
• Consult the dealer or an experienced radio/TV technician for help. The user should not modify or change this equipment without written approval from PlayMakar Inc. Modification could void authority to use this device. Note: The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARRANTY This PlayMakar Pro Strength & Recovery System carries a one-year warranty from the date of purchase. ® The warranty applies to the remote, receiver pods, necessary parts, and labor relating thereto. Consumable items, like electrode pads and other accessories, are guaranteed to be free from defects in workmanship and materials at the time of delivery.
Customer satisfaction is a key factor in every PlayMakar transaction. ® We are a company with a passion for affordable and effective sport and fitness products. At PlayMakar , word-of-mouth ® recommendations result in a large percentage of our business. This is a testament to our excellent product value and customer satisfaction.
PlayMakar Inc. www.PlayMakar.com 1603 Hart Street Southlake, TX 76092 If you have any questions whatsoever regarding your PlayMakar® Pro Strength & Recovery System Model # PRO-1000, contact your reseller or PlayMakar Inc. at: 833-PLAY-MAKAR (833-752-9625) or visit www.PlayMakar.com...
Need help?
Do you have a question about the PRO-1000 and is the answer not in the manual?
Questions and answers