Advertisement
1. Remove protective film from stainless hood.
2. Align three notches located on back side of hood with front face of fireplace (see Figure). Notches should be at least 2" up
from edge of fireplace opening.
3. Hold fireplace hood in place. Using a #34 (0.11 dia.) drill bit, drill through 3 notches.
4. Insert 3 screws through notches in hood into holes in fireplace.
121311 01
NOT A UPC
OUtdOOr Fireplace hOOd
iNstallatiON iNstrUctiONs
hs36 - 36" OUtdOOr Fireplace hOOd
hs42 - 42" OUtdOOr Fireplace hOOd
Notches
on Hood
Screws
Figure - Installing Hood
2701 Industrial Drive
P.O. Box 90004
Bowling Green, KY 42102-9004
www.desatech.com
121311-01
Rev. A
03/07
Advertisement
Table of Contents
Need help?
Do you have a question about the HS36 and is the answer not in the manual?
Questions and answers