SmartRef RV-200B Comfort Plus Installation Instructions

Commercial recessesd housing

Advertisement

INSTALLATION INSTRUCTIONS

Destratification Ventilateur
RV-200B
COMFORT PLUS
COMMERCIAL RECESSED HOUSING

WARNINGS

All installations should be in accordance with the building regulations and the local authority. The equipment
should be installed by a certified electrician. Be sure to keep all electrical wiring clear of any moving parts. Inspect
all shipments carefully for damage. The receiver must note any damage on the carrier's proof of delivery and file
a claim immediately with the freight company. Disconnect power before installing or servicing the equipment.
NOTE
Smartref Technologies are designed to meet the latest requirement and are listed in full compliance with UL 507
and CSA 22.2 no.113. For Indoor use only
WARNINGS
FOR YOUR SAFETY, READ AND UNDERSTAND INSTRUCTIONS COMPLETELY BEFORE
STARTING INSTALLATION. BEFORE CONNECTING TO THE POWER SUPPLY, TURN OFF
ELECTRICITY AT THE FUSE OR CIRCUIT BREAKER BOX
Techonologies Smartref Inc. 1341 rue principale, St-Zotique (Québec) J0P 1Z0
(514) 267-3773
For additional information please visit www.smartref.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RV-200B Comfort Plus and is the answer not in the manual?

Questions and answers

Summary of Contents for SmartRef RV-200B Comfort Plus

  • Page 1: Installation Instructions

    Disconnect power before installing or servicing the equipment. NOTE Smartref Technologies are designed to meet the latest requirement and are listed in full compliance with UL 507 and CSA 22.2 no.113. For Indoor use only...
  • Page 2 COMFORT PLUS COMMERCIAL RECESSED HOUSING VENTILATEUR INSTALLATION GENERAL NOTES The Smartref destratification technologies are self-contained units incorporating a 6 foot electrical cord with a three-way plug. They are designed to minimize temperature stratification and localize the down draft the appropriate area.
  • Page 3 Improper grounding can result in a risk of electrical shock. Position the outlet offset so that the power cord will be correctly connected to the outlet. Place the outlet at a maximum of 5’ from the equipment Conforms to UL 507 Certify to CSA C22.2 no 113 www.smartref.com...

Table of Contents