Download Print this page

FoamMasters X-Stream Handbook

Foam cannnon

Advertisement

Quick Links

WELCOME
Important Information About your Foam Cannnon X-Stream Machine
Congratulations on your purchase of this FoamMaters foam machine. With
your foam machine you will dazzle and entertain audiences in large or small
venues. Your Foam Cannon X-Stream is manufactured with many features,
but at the same time it is very easy to use.
The Foam Cannon X-Stream is a recreational foam generator used for creating an entertaining
environment for parties, nightclubs, and fun special effects. Its sleek design and stainless steel
construction makes it a popular appliance for years and years of foam making. The Foam Cannon
X-Stream will produce large quantities of foam in a short period of time (10-20 minutes), so there is
fun for all as soon as the Cannon is activated.
IMPORTANT PRODUCT AND SAFETY INFORMATION
Failure to follow these instructions can cause serious bodily injury or property damage.
CAUTION: YOU MUST READ THE FOLLOWING BEFORE
OPERATING THE FOAM CANNON X-STREAM.
The Foam Cannon X-Stream is an Electric Product and not a Toy. Adult Supervision is Continuously
Necessary to Avoid the Risk of Electric Shock or Personal Injury. It should not be operated or
placed where small children can reach it. Always keep fingers away from the FAN GUARD
and never remove the GUARD or the Electronic Enclosure Cover. Children should also always stay
away from the solution container at all times to minimize the risk of shock or drowning.
The Foam Cannon X-Stream generates a layer of foam on every surface that obscures ground vision
and can cause slipping. Always prepare your foaming area using a flat surface free of obstructions,
such as steps, standing water, cables, ledges, electronic equipment, rocks, toys, and sharp objects
before generating foam.
Never place the pump in water or remove the pump from the water while the Foam Cannon X-
Stream is plugged into an electronic socket. Always use a plastic container to hold solution.
Do not run the Foam Cannon X-Stream while the solution container has a water or solution level
lower than 1/8". Never use water with a temperature greater than 104 Degrees F. Never use any
ingredient in your solution container other than water and/or your Foam Master's foam solution. If
you do not follow these directions, the pump and Cannon can be damaged.
Always operate the Foam Cannon X-Stream on a dry, level surface with the rear brakes locked. The
cables and hose should be routed so that pedestrian traffic cannot trip over the cable or hose.
Never leave the Foam Cannon X-Stream unattended while operating. Do not operate it in the rain or
in standing water. Do not place the Foam Cannon X-Stream within 10 ft (3 meters) of a swimming
pool, steps, or a ledge without a guardrail.
Use Caution when adjusting the vertical aim of the Cannon nozzle, since it may rotate freely when
unlocked and contact (injuring) someone underneath the cone.
Always use an outlet with an earth grounding receptacle and a Ground Fault Circuit Interrupt (GFCI).
Never use this product for any activity other than for what it is intended.
1

Advertisement

loading

Summary of Contents for FoamMasters X-Stream

  • Page 1 The Foam Cannon X-Stream will produce large quantities of foam in a short period of time (10-20 minutes), so there is fun for all as soon as the Cannon is activated.
  • Page 2 Foam Cannon X-stream Features and Specifications Features ❆ Made primarily of stainless steel ❆ Castoring wheels with brake locks ❆ Low consumption of water and foam gel ❆ Lifetime warranty ❆ Long lasting dry foam ❆ Fast type connector for water inlet ❆...
  • Page 3 Foam Masters Labs are constantly inventing and reformulating solutions in order to improve the foam from the Foam Cannon X-Stream. Please contact Foam Masters at 800-745-8599 for more information on new foams. In order to prevent operation problems, always use a Foam Master approved foam solution.
  • Page 4: Operating Instructions

    floor slippery, which is part of the fun. 2) Locate the Foam Cannon X-Stream 10 feet (3 meters) from the area you intend to fill with foam. Aim the nozzle in the desired direction and lock the rear caster wheels to prevent the Cannon from rolling.
  • Page 5: General Maintenance And Cleaning

    ANYONE OTHER THAN A TRAINED FOAMMASTER TECHNICIAN. Cleaning Simplified In order to clean the Foam Cannon X-Stream, fill another plastic container with water and insert the Sump Pump (the Cannon or Pump unplugged) as before. Run the Foam Cannon for 3-5 minutes.
  • Page 6 Types of Trouble and Their Solutions Symptoms and Cause and/or Corrective Actions If the Cannon does not generate foam, review the following checklist. a) Is the Fan Operating? (Air is shooting out nozzle of Cannon.) Yes: Move on to (b) No: Check the electric plug interface to the outlet connection.
  • Page 8: Limited Lifetime Warranty

    Limited Lifetime Warranty Foam Masters provides a limited lifetime warranty for the Foam Cannon X-Stream for all manufacturing defects for such items as the fan, pump, valves, electronics, casters and components. Any misuse, abuse or negligence automatically voids our warranty. Running any liquids/materials other than water and the Foam Masters solutions through the pump/cannon automatically voids our warranty.
  • Page 9 FOAM CANNON X-STREAM The Ultimate Foam Generator www.foammaster.com ©2004 FoamMasters, Inc.