Summary of Contents for AVP Synthesizer MAD-5 mk2
- Page 1 AVP Synthesizers MAD-5 mk2 Midi Analog Drum synthesizer User Manual www.avpsynth.com...
- Page 2 - Weight: 1.26 kg. * MAD-5 mk2 operates on 220 volts, if used on 110 volts - a power converter from 220 to 110 volts is required. So if you are in a 110 volts area, please only use it with a power converter.
- Page 3 Controls Front panel Rear panel www.avpsynth.com...
- Page 4 MIDI device) to the MAD-5 mk2 MIDI IN port. Setting the MIDI-channel - In order to set the needed MIDI channel on the MAD-5 mk2 - a MIDI button is used which is located on the front panel. The 1 MIDI channel is set by default.
- Page 5 From there on the MIDI indicator will stop blinking meaning that the desired MIDI channel has been set. It will be saved in the memory of MAD-5 mk2. Powering MAD-5 mk2 Set the POWER button located on the rear to On. From that moment on MAD-5 mk2 is ready for action ...
- Page 6 5 volts and a duration of 2-5 ms. Working with MIDI Each of the drum instruments of the MAD-5 mk2 responds by pressing the respective keys on the MIDI-keyboard, another MIDI trigger device, or when receiving MIDI data from sequencer.
- Page 7 - Adapter; - Controls if their failure was caused by normal wear or contamination during use. Feel free to email us if you have any questions: avpsynths@gmail.com AVP Synthesizers www.avpsynth.com...
Need help?
Do you have a question about the MAD-5 mk2 and is the answer not in the manual?
Questions and answers