ISASWISS 9232 Instruction Manual

： ： ： ：
Calibre 9232 / 1920
Function
Month-date-day Second time zone / 24-hour
:
Illustration
Month
Hour hand
Day
Second hand
Second time zone / 24 hour
Set the time-Hour, Minute and 24-Hour
A.
Set the Second Time Zone
B.
Set the Date
C.
Set the Day
D.
Set the Month
E.
Battery
: 371 – SR920SW
 2008 ISA Group. All rights reserved. ISA may make changes to specifications and product descriptions at any time, without prior notice.
35001-9232-1920-001 Technical documentation – Instruction manual – 9232/1920-090505
Instruction Manual
Date
1. Pull the crown out to position 3.
2. Turn the crown clockwise to set the hour, minute and
24-hour hands to the desired time.
3. Push the crown back to position 1．
1. Set the crown at position 1.
Press B step-by-step to advance the hand of the
2.
time zone by one hour per step until the desired time is set.
3. Stop pressing the button after finished the setting.
1. Pull the crown to position 3．
2. Turn the crown clockwise. The date will advance 1 day
when the time reaches 00:00midnight. Continue to turn
the crown until the desired date is set.
3. Push the crown back to position 1.
Quick Correction of Date
1. Pull the crown out to position 2．
2. Turn the crown clockwise step-by-step to the desired date.
3. Push the crown back to position 1．
!! Attention
1.
2.
3.
1.
2. Press A step-by-step to adjust the month to the desired one.
3.
!! Attention
Room 1605, 16/F., Eastern Centre,
1065 King's Road, Quarry Bay, Hong Kong
Tel: (852) 2168 3388
分針
Minute hand
Minute hand
Push button A
- Quick correction of month
Crown Positions：
1. Normal position
2. Quick correction of date
3. Correction of hour, minute, day,
date and second time zone/24-hour
Push button B
- Quick correction of second time zone / 24-hour
:
!!： ： ： ： please Do Not set it between 21:00 and 00:30 midnight
Pull the crown to position 3．
Turn the crown clockwise to advance the day hand
until the desired day is set． The day hand will advance one
day when 04:00 in the morning is reached.
Push the crown back to position 1．
Set the crown at position 1．
Stop pressing the button after finished the setting.
!!: Please Do Not use Quick Correction on 31th of each month．
www.isa-pacific.com
ISA PACIFIC Co., Ltd.
Fax: (852) 2552 3181
Email: sales@isa-pacific.com
Web site: www.isaswiss.com
second
Page 1/1