Table of Contents
Advertisement
4
1) Remove a green insulation Tape on the
FPCB Connector using tweezers.
2) Open the cover of the Connector and pull
out the Slide FPCB carefully in the PBA.
※ caution
1) Attention not to be get the crack
6
1) Softly remove tape using tweezers, FPCB
and in tape internal it pulls out Extract
FPCB to TAPE inside after lift TAPE using
tweezers
※ caution
1) When pulling out the FPCB on LCD, not to
be bend.
Downloaded from
www.Manualslib.com
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
manuals search engine
5
1) Remove the Screw Cap
2) Unscrew 4 places of Front
※ caution
1) Attention, SET does not occur scratch
2) Using the a screwdriver
7
2) Remove bronze cover tape, FPCB take off
in lower such as the picture
※ caution
1) When pulling out the FPCB on LCD, not to
be bend.
5-5
Exploded View and Parts List
Advertisement
Table of Contents
