Connecting Power To Controller; Installing Software - SIMXPERIENCE ACCUFORCE PRO Quick Start Manual

Connecting Power To Controller

WARNING: After connecting the power, the motor will calibrate. Ensure that your unit is safely
mounted and free of obstruction.
Do not connect the telephone-style coiled cable to the button box until after the motor has
calibrated!
1. Locate the supplied IEC (PC style) power cord.
2. Ensure that the power cord matches your power receptacle.
3. Connect the power cord to the controller box and then to the wall outlet.
4. The unit will now calibrate. Wait for the calibration to complete and do not interfere
with the calibration process.
5. Wait for Windows to finish installing drivers if this is the first use.

Installing Software

1. Download the Sim Commander 4 software from the order details section of the SimXperience
website.
2. Run the setup.exe
3. Follow the prompts in the wizard to set your simulator type. (select Motionless if you have only
the AccuForce and/or SimVibe)