Advertisement
ATTACHING THE UNIT TO THE MOUNTING HARDWARE
The Scent Crusher® Field Pro can be attached to the Tree Screw (D), Tree
Strap (E) or Ground Blind Clamp (H). Refer to CONTENTS on page 4 to
identify the parts in the mounting kit.
1) Screw the Ball Mount (A) into the
bottom of the Field Unit. Tighten the Ball
Mount Connector (B) to the Ball Mount
(A) using the T-Bolt on the Ball Mount
Connector (B); see illustration #1.
2) If using in a tree stand, attach the
Primary Arm (C) to the Ball Mount
Connector (B); see illustration #2. Once
connected, tighten the Jam Nut on
the Primary Arm (C) to the Ball Mount
Connector (B). Now you are ready to
attach the Primary Arm (C) to the Tree
Screw (D) or Tree Strap (E). Using the
Long T-Bolt (G), attach the Primary Arm
(C) to the Tree Screw (D); see illustration
#3, or Tree Strap (E); see illustration #4.
If necessary, use the Extension Arm (F)
to add additional distance to the Primary
Arm (C) by inserting the Primary Arm (C)
into the Extension Arm (F). Use the T-Bolt
on the Extension Arm (F) to tighten the
Extension Arm (F) to the Primary Arm (C);
see illustration #5.
3) If using in a ground blind, attach the
Ground Blind Clamp (H) to the Ball Mount
Connector (B). Once connected, tighten
the Jam Nut on the Ground Blind Clamp
(H) to the Ball Mount Connector (B); see
illustration #6. Connect the Ground Blind
Clamp (H) to desired ground blind pole.
NOTE: Secure the Tree Screw (D) or Tree Strap (E) to the tree before attaching
the unit.
For more detailed information VISIT scentcrusher.com
B
Illustration #1
C
Illustration #2
G
D
Illustration #3
G
E
Illustration #4
F
Illustration #5
H
Illustration #6
A
B
C
C
C
B
5
Advertisement
