Download Print this page

SIST&MATICA Easy User And Maintenance Manual

Radio remote control transmitters

Download this manual

...RADIO REMOTE CONTROL TRANSMITTERS

This manual is an essential part of the device and it should be thoroughly kept for later consultation.

Carefully read the warnings contained in this manual, concerning safety and a proper preservation of the

product. These warnings are ALWAYS to be carefully read before using the device. SIST&MATICA S.r.l.

declines all responsibility for any trouble arising from the non-compliance with these warnings.

•

AVOID ATTEMPTING TO REPAIR THE DEVICE BY YOURSELF. REPAIRS PERFORMED BY

UNSKILLED PEOPLE CAN CAUSE SERIOUS DAMAGES OR FAILURES. FOR ASSISTANCE,

APPLY TO YOUR LOCAL AUTHORIZED SERVICE CENTRE. USE ONLY ORIGINAL SPARE PARTS.

•

ALWAYS KEEP AT A SAFE DISTANCE FROM THE MOVING PARTS.

•

KEEP THE RADIO CONTROL OUT OF THE CHILDREN'S REACH.

SIST&MATICA Srl

Via S. Pertini, 17 - 12030 MANTA (CN) ITALY Tel. +39 0175 255.700 r.a. - Fax +39 0175 255.715

http://www.sistematica.it

USER AND MAINTENANCE MANUAL

WARNINGS

e-mail:

info@sistematica.it

Pag.

Need help?

Do you have a question about the Easy and is the answer not in the manual?

Page 1 …RADIO REMOTE CONTROL TRANSMITTERS USER AND MAINTENANCE MANUAL WARNINGS This manual is an essential part of the device and it should be thoroughly kept for later consultation. Carefully read the warnings contained in this manual, concerning safety and a proper preservation of the product.
Page 2 TECHNICAL FEATURES LED INDICATED ON THE RADIO TRANSMITTER • Working frequency 433.92 MHz; REGULAR FUNCTIONING • Battery supply (no. 2 "AAA" 1,5V Cell, Alkaline While functioning regularly, the LED flashes when any Batteries) key is pressed. • Transmission average absorption < 5 mA LOW BATTERY •...
Page 3 TRANSMITTER’S BATTERIES REPLACEMENT Due to the electronical microelements of the radio control transmitter, carefully handle the under described operations in a clean environment. Use n. 2 “AAA” 1,5 V type alkaline batteries (due to the low radio control transmitter consumption it is not advisable to use carbon zinc batteries as they can undergo self-discharge more rapidly than...
Page 4 Take the discharged batteries off. Put the new batteries in, taking care of the polarity indicated next to every contact. Before closing the battery case, check that the LED flashes when any key is pressed and released on the transmitter. If this should not happen, check the correct positioning of the batteries.