Advertisement
Quick Links
1
ACCESSORIES LIST
2
User Manual
Quick Setup Guide
Remote Control
Screw B
(M6 × 30) ×
4 (40K360MN)
Spacer × 4
Screw A (M5 × 12) × 8
(M6 × 45) ×
4 (46K360MN)
Batteries: AAA × 2
2
INSTALLING THE STAND
Follow the illustrations below to complete the installation steps.
2
1
Stand cover
Groove
Ridge
Stand column
Back View
Align the front of the stand column
Align the stand cover with the stand
with the front of the base, then insert
column, then secure the stand cover
4
REMOTE CONTROL
the stand column into the base
to the stand column with 1 Screw A
making sure that the groove in the
(M5 x 12) . Make sure that the bottom
stand column aligns with the ridge in
of the stand cover is flush against the
the base. Secure the stand column to
top of the stand column.
the base with 3 Screws A (M5 x 12) .
NOTES
3
Product image is only for reference, actual product
may vary in appearance. Carefully place your TV
Select TV / AV / VGA / USB source
facedown on a soft, cushioned surface to prevent
damage to the TV or scratching to the screen.
Adjust closed caption mode
Used when Roku Streaming
Secure the stand to the TV with the 4
Screws A (M5 x 12).
3
INSTALLING A WALL-MOUNT BRACKET
If you want to attach the TV to a wall-mount bracket(not provided), you should
rst remove the stand if it is pre-attached .
1
1. If you want to attach the TV to a wall-mount bracket (not provided), you
should first remove the stand if it is pre-attached. Make sure the TV is laid
face-down on a clean, safe, and cushioned surface.
2. Attach purchased bracket (1.5~2.5 mm thickness) on the TV with the 4 screws
in the Screw B pack.
Select a digital sub-channel
Bracket (1.5~2.5 mm)
CHANGE THE BATTERIES
1. Slide the back cover to open the battery compartment of the remote control.
2. Insert two AAA size batteries. Make sure to match the (+) and ( - ) ends of the batteries with
the (+)and ( - ) ends indicated in the battery compartment.
Spacer × 4
Screw B
3. Close the battery compartment cover.
WARNING
To prevent internal damage to the TV and ensure the TV is mounted securely, use
only the 4 screws in the Screw B pack.
1
K360
Series
5
BUTTONS AND CONNECTORS
Screws B
9.5~12.5 mm
Wall-mount Bracket
Screw
the TV's rear cover
Spacer
200 × 200 (40")
Wall-Mount hole pattern VESA (mm)
400 × 400 (46")
Wall-Mount screw size (mm)
M6
DIGITAL
AUDIO OUT
Follow instructions provided with the Wall-Mount bracket.
•
If you are not sure of your ability to do complete the installation, contact a
Item
professional installer or service technician for assistance. The manufacturer is
not responsible for any damages or injuries that occur due to mishandling or
MENU
incorrect assembly.
•
Be sure to use the provider spacers between the TV and the bracket when
INPUT
attaching the mount.
VOL+/-
CH
/
(Power button)
ANT/CABLE
Infra-red transmitter
HDMI
Power on/off
Select input source
COMPONENT IN
Select picture mode
AV IN
Select HDMI source
Select component source
Select sound mode
VGA
Zoom button
PC/DVI AUDIO IN
Display favorite list
Audio select button
/AUDIO OUT
Stick connected
Mono/Stereo/SAP operation
Media content control
DIGITAL AUDIO OUT
function buttons
MENU button
Used when Roku Streaming Stick
USB
connected
Move Up/Down/Left/Right
or adjust settings
Close the menu
Display the information banner
MUTE button
6
Increase volume
Next channel
TV CONNECTORS
Decrease volume
Previous channel
Display the channel name
Check the jacks for position and type before making any connections. Loose
connections can result in image or color problems. Make sure that all connections are
tight and secure.
Direct channel selection
ANT
Connect an outdoor VHF/UHF antenna.
Dash button
Go to the previous channel
Media content
Set the sleep timer
control function buttons
USB
Connect a USB device for browsing photos and movies.
USB
DC 5V 0.5A(MAX)
Gently push and slide
2
Insert the batteries
3
Gently push and slide
HDMI / COMP / AV
MENU
INPUT
VOL+
VOL
-
CH
CH
AC power cord
AV IN
VIDEO
L -AUDIO- R
USB
HDMI 1/ARC
/AUDIO
Y
P
B
P
R
DC 5V 0.5A(MAX)
OUT
COMPONENT IN
Description
VGA & VGA AUDIO
Display the on-screen menu to setup your TV's features.
Select the different input signal sources.
Adjust the volume.
Select the channel.
Turn on the TV or put the TV in standby mode.
Caution: The TV continues to receive power even in standby mode.
Unplug the power cord to disconnect power.
DIGITAL AUDIO OUT
Connect an antenna or cable TV to this jack.
HDMI (High-Definition Multimedia Interface) provides an
uncompressed, all digital audio/video interface between this TV and
any HDMI-device, such as a set-top box, Blu-ray disc player, or A/V
DIGITAL
receiver.
AUDIO OUT
Connect to a DVD player, Digital Set-Top-Box, or other A/V devices
with component (YP
P
) video and audio output jacks.
B
R
HEADPHONE
Connect to the composite video and audio (L/R) output jacks on
external video devices.
Connect to a PC or other devices with a VGA or DVI interface.
AUDIO
OUT/
Connect headphone or analog sound system using RCA Y-cable
(1/8"-stereo mini to L/R phono-not provided).
Connect an audio amplifier to this jack.
Port for Digital Media Player and for software update.
7
SPECIFICATIONS
Model Name
Without Stand
Dimension
With Stand
Without Stand
Weight
With Stand
LCD Panel Minimum size
(diagonal)
Screen resolution
Audio power
VHF/UHF Antenna
OR
Power supply
Cable
Analog
ANT OUT
Receiving
OR
systems
Digital
Receiving channels
Tuner type
Environmental conditions
Component Input
Mobile Hard Disk
VGA Input
HDMI Input
8
TURNING THE TV ON FOR THE FIRST TIME
Connect an HDMI cable or Comp/AV Adapter from an
Menu Language
external A/V equipment.
Video E ect:
BEST (HDMI)
Choose Your Menu Language
English
BETTER
Français
(COMP)
Español
Enter
Select
ENTER
Français, or Español
Set menu language to English,
Connect your TV's power cord to a power outlet, then press
power. The initial setup screen opens. Press [ / ] button to
select your language, press [ENTER] button to confirm.
Picture Mode
GOOD
(AV)
Choose Your Picture Mode
Home Mode
Retail Mode
Home mode default settings are recommended for in-home
use. ENERGY STAR
@
qualified.Retail mode is intended for
in-store display and resets video settings at Power On.
ENTER
Enter
Select
Reduces total power consumption
Connect a VGA cable and an audio cable from the PC.
Press [ / ] to select your Picture Mode: Home Mode or
Retail Mode, press [ENTER] button to confirm.
If you select Retail Mode, a message appears " Are you
sure you want retail mode?" Select "Yes" to continue, or
select "No" to change your selection.
For energy saving, we kindly suggest you select the Home
Mode.
Note:
If you are using a cable or satellite box and you have connected it to the TV using a Coaxial cable, you should select the cable option. Be sure the cable or satellite box is turned
Connect an optical cable from an external digital
on before starting the channel scan. If you use a cable or satellite box connected to A/V, Component or HDMI, you don't need to scan for channels.
audio system.
9
HELP TOPICS
When there is something wrong with your TV, you can try turning o the TV and restarting it. You can also refer to the following chart
Connect Headphone for audio out of the TV.
for problem and solution tips.
SYMPTOMS
OR
No sound or picture
Picture is normal, but no sound
I have connected an external
source to my TV and I get no
picture and/or sound.
40K360MN
46K360MN
Width: 36.29 inches (921.8 mm)
Width: 41.63 inches (1057.3 mm)
Sound but no picture or black
Height: 21.74 inches (552.3 mm)
Height: 24.74 inches (628.5 mm)
and white picture.
Depth: 2.28 inches (57.9 mm)
Depth: 2.4 inches (61 mm)
Width: 36.29 inches (921.8 mm)
Width: 41.63 inches (1057.3 mm)
Sound and picture distorted or
Height: 2.28 inches (57.9 mm)
Height: 27.06 inches (687.5 mm)
appear wavy.
Depth: 8.86 inches (225 mm)
Depth: 9.84 inches (250 mm)
25.4 lbs (11.5 kg)
34.2 lbs (15.5 kg)
Sound and picture is blurry or
28.7 lbs (13 kg)
38.8 lbs (17.6 kg)
cuts out momentarily.
40 inches
45.8 inches
[CH /
V] don't work when I
1920 × 1080
1920 × 1080
set the Channel to Cable?
7 W + 7 W
8 W + 8 W
They work with the Air setting?
120 V ~ 60 Hz
NTSC
ATSC / QAM
VHF: 2~13 UHF: 14~69 CATV: 1 ~ 125
Digital Terrestrial Broadcast (8VSB): 2 ~ 69
Digital cable (64/256 QAM): 1 ~ 135
Frequency synthesized
Temperature: 41°F ~ 95°F (5°C ~ 35°C)
Remote control does not work.
Humidity: 20% ~ 80% RH
Atmospheric pressure: 86 kPa ~ 106 kPa
480 I / 60 Hz, 480 P / 60 Hz, 720 P / 60 Hz, 1080 I / 60 Hz, 1080P/60Hz
VGA (640×480 / 60 Hz), SVGA (800×600 / 60 Hz), XGA (1024×768 / 60 Hz)
RGB / 60 Hz (640×480, 800×600, 1024×768)
YUV / 60 Hz (480 I, 480 P, 720 P, 1080 I, 1080P)
CY-G
Barcode
35*10.5mm
Time Setting
Choose Your Time Setting
Mode
Auto
Time Zone
Daylight Savings
Off
Year
2012
Month
January
Day
01
Time
01:10 AM
Return
Exit
Enter
Select
Return
Exit
MENU
EXIT
ENTER
MENU
EXIT
If Automatic, options are automatically set by TV source
Setting Time Zone: Select the local time zone according to
your region.
Setting the Time: Press [ / ] to select the number you want
to set and press [ / ] to set.
TV Source
Choose Your TV Source
Antenna
Cable
MENU
Return
EXIT
Exit
Enter
Select
Return
Exit
ENTER
MENU
EXIT
Select if using an antenna for standard or HD TV
Press [▲/▼] to select your TV Source: Antenna or Cable,
press [ENTER] button to confirm.
If you press [EXIT] to exit the scanning, a message appears
"Please Run Channel Auto Scan", you should scan channels
from the menu of Channels
POSSIBLE SOLUTIONS
• Confirm power cord is plugged into the AC outlet and the AC outlet is getting electricity.
• Attempt to power on unit using the power button on both the TV and the Remote.
• Check the volume settings.
• Check if Mute mode is set "on" .
• Check for the correct output connection on the external source and for the correct input connection on the TV.
• Make sure you have made the correct selection for the input mode for the incoming signal.
• If black and white picture first unplug TV from AC outlet and replug after 60 seconds.
• Check Color Setting if picture is black and white.
• An electrical appliance may be affecting TV set. Turn off any appliances, if interference goes
away, move appliance farther away from TV.
• Insert the power plug of the TV set into another power outlet.
• If using an external antenna, check the direction, position and connection of the antenna.
• Adjust the direction of your antenna or reset or fine tune the channel.
• After switching to Cable, please auto program the channels. The TV will "remember" all the channels then
the TV will allow you to surf the channels with [CH /V] buttons.
• Confirm that TV still has power and is operational.
• Change the batteries in the remote control.
• Check if the batteries are correctly installed.
• Clean the front of the remote control (LED window).
• If using a universal remote, be sure to select the TV mode on the remote.
• If the remote still does not work:
-Remove and reinstall the batteries correctly to reset the remote or install new batteries.
-Press the Power button to turn on the TV. With a universal remote if you have reset or changed the batteries
you will need to reprogram the remote for the other units.
• Check if there is obstruction between the remote control and the TV.
TIP: If you have a digital camera / camera phone, you can aim the front of the remote at camera lenses (at
this time, the camera should set on camera mode, not play mode). Observe the camera screen while
pressing a button on the remote control; you should see flashing light on the screen. If there is no light
observed, the remote control is not working. You need to repair or replace the remote control.
Advertisement
