Download Print this page

Bubbli BBSTERMICRA Quick Start Manual

Microwave steam steriliser

Advertisement

Quick Links

Read these instructions carefully before use. Failure to follow and observe these instructions
may lead to accidents.
Do not place unit on hot surfaces such as cooking plates, burners, ovens or similar.
Must be used on a flat, stable surface.
This appliance is for household use only. It is not designed for professional, industrial use.
This is not a toy. Children should be supervised to ensure that they do not play with it.
Ensure your hands are clean at all times while using the steriliser.
Before using this steriliser, wash all bottles and accessories with lukewarm soapy water,
then rinse them all thoroughly.
The water limits must be followed strictly to prevent scalding and to achieve optimal
results.
Do not reuse residual water from previous use.
Do not sterilise without water in the base.
Do not sterilise metallic or electronic items in this steriliser.
Do not sterilise bottle brushes in this steriliser.
Do not overload the steriliser.
Always place bottles and accessories with their cavities facing downwards during
sterilising.
Do not place the tray upside-down.
Ensure the handles of the lid are locked before you start sterilising.
Ensure the microwave is dry and clean before using the steriliser.
Do not exceed the recommended heating time.
If the microwave has a grill function, ensure that it is switched off and completely cooled
down before placing the steriliser in the microwave.
Always allow at least 2 minutes for the steriliser to cool down after sterilising. Check its
temperature with the back of your hand before taking it out of the microwave to avoid
burns.
Keep a safe distance from the steriliser to avoid the hot steam that will escape.
Handle the steriliser and sterilised products with care at all times, as they may be hot.
Any misuse or failure to follow these instructions renders the warranty null and void.

Advertisement

loading

Summary of Contents for Bubbli BBSTERMICRA

  • Page 1 Read these instructions carefully before use. Failure to follow and observe these instructions may lead to accidents. Do not place unit on hot surfaces such as cooking plates, burners, ovens or similar. • Must be used on a flat, stable surface. •...
  • Page 2 Measuring Cup (120ml) 2. Lid 3. Handles 4. Tray ◦ Teat Cavity ◦ Bottle Cavity ◦ Center Stem with Slots 5. Base 6. Clipper Lift tray out of base. 2. Pour 200ml water into the base using the measuring cup (Fig 1). 3.
  • Page 3 Place 6 teats on the cavities with the 'teats' symbols surrounding centre stem. 2. Put the screw rings on top of the teats. 3. Put 3 bottle covers onto the slots of the centre stem, and the other 3 covers on top. 4.