Advertisement
Table of Contents
KNOG PARTY COMBO
- HOW TO GUIDE -
STARTING OUT:
Default code: 0-0-0-0
1. Remove the black plug
2. While holding the cable ends, firmly hold &
rotate the end cap
3. Keep cable fixed during reset
Listen for *click*
DO NOT TWIST ANY DIALS
ACTIVE RESET:
4. Reset is active when endcap is twisted
counter-clockwise 90
o
so the shackle entry
lines up with the marker and clicks into place
5. Active reset: set code to the lower marker
(blue circle)
NEW CODE:
6. Choose your combination - align with marker
(blue circle)
ie. The chosen code for the lock diagram is
"4352"
Advertisement
Table of Contents
Summary of Contents for Knog PARTY COMBO
- Page 1 KNOG PARTY COMBO - HOW TO GUIDE - STARTING OUT: Default code: 0-0-0-0 1. Remove the black plug 2. While holding the cable ends, firmly hold & rotate the end cap 3. Keep cable fixed during reset Listen for *click*...
- Page 2 SET CODE: 7. To SET new code return the end cap to its original position by twisting clockwise to align with cable marker *DO NOT rotate dials at this stage* LOCK & LOAD: 8. New code is now ACTIVE. This means shackle is open to insert cable pin. 9.
Need help?
Do you have a question about the PARTY COMBO and is the answer not in the manual?
Questions and answers