Description Note In order to avoid a hazard due to inadvertent resetting of the thermal cutout, Your electrical fireplace provides you with the comfortable heat and this appliance must not be supplied through an external switching device, ambiance of a wood stove without the additional work such as a timer, or connected to a circuit that is regularly switched on and off by the utility.
Select the desired function: Fire effect (3d) Fan (3a) (without heating) Half power 750w (3a + 3b) Full power 1500w (3a + 3b + 3c) Heat and fire effect (3a + 3b + 3c + 3d) Fan function is necessary to activate heat functions. Without fan the heater cannot run.
Fitting the feet Remove leg from the bag, and locate and line up holes in the leg, with holes in the underside of the stove body. Repeat the above for the other three legs. Maintenance And Cleaning Switch off and unplug the stove, and ensure it’s perfectly cooled before cleaning or doing maintenance work.
Page 5
3. This is how the leg looks when attached correctly. 4. This is how the stove will look when all four legs are in place.