Table of Contents
Advertisement
Fuse Replacement
When thecigarette
lighter adaptor does
not operate, check to see if the fuse has
blown. If the fuse has blown,
try to
determine
the cause, then replace the
fuse according
to the following
proce-
dure.
1.
Disconnect the cigarette lighter plug
from the cigarette lighter socket.
2. Turn the end portion of the plug and
remove.
3. Remove the blown fuse.
4. Put in a new 3A fuse.
5. Turn the end portion of the plug and
tighten.
Fuse
I
Tighten
I
I
Remove
I
End of the plug
Cigarette
lighter plug
NOTES:
Replace
the fuse with
one
of the
same rating.
If the fuse blows again after replace-
-
ment, contact
the store where
you
purchased
the
unit,
or contact
a
Sanyo Authorized
Service Station.
I
-E15-
Advertisement
Table of Contents
