WeGo Elite User Manual

ELITE
ALL DAY ACTIVITY TRACKER
USER GUIDE
/INSTRUCTION MANUAL
WWW.JoinWeGo.com
Made in China. WeGo™ is a trademark of EB Sport Group, Hazleton, PA
18202. Distributed in the United Kingdom by EB Brands (UK), Worcester
WR4 9FA. MapMyFitness is a trademark of MapMyFitness, Inc. iPhone and
iPad are trademarks of Apple Inc., registered in the U.S. and other countries.
Android and Google Play are trademarks of Google Inc.
All Rights Reserved. ©2014 Designed and engineered by EB Labs
Caution: not a medical device. Should not be used to diagnose or treat
any medical condition. Consult your doctor for prevention, diagnosis and
treatment. See the user guide for further guidance.
WO1592ISO1SPO
4- PROGRAMMING THE ACTIVITY TRACKER
1. Enter the Programming Sequence by PRESSING & HOLDING the SET
button on the back of the unit for approximately 3 seconds.
2. Adjust the value of each of the settings shown by PRESSING the + button
to increase or MODE button to decrease. Press SET to confi rm.
3. When prompted for stride length, this activity tracker has an automatic
stride length calculator that sets your length based on your height. PRESS
the SET button to accept this value or you can adjust your Stride Length
(see "Determining Stride Length" on the back page) by PRESSING the +
or MODE buttons.
4. SAVED will be displayed on the fi nal press of the SET button. The unit is
now programmed and ready for use!
HOLD SET FOR 12/24 HOUR FORMAT
3 SECONDS
+
PRESS OR MODE TO ADJUST VALUE, PRESS SET TO ADVANCE TO CONFIRM
SAVE STRIDE LENGTH
WO1592IS01SPO.indd 1 WO1592IS01SPO.indd 1
1- GETTING STARTED
Congratulations on your purchase of a WeGo™ ELITE. The WeGo™
ELITE features highly advanced sensor technologies that accurately
measure your body movements when worn from multiple locations on
the body and in multiple orientations. In addition, the built-in audio
jack technology allows you to easily upload your data to any compatible
smartphone or tablet through the Join WeGo™ smartphone application.
Please visit www.JoinWeGo.com/compatibility for a complete list of
compatible devices.
Downloading the Join WeGo™ Application:
In addition to the Activity Tracker you have purchased, you will also need
to download the Join WeGo™ application for FREE on to your compatible
smartphone or tablet and create a user account.
For a complete tutorial regarding downloading, installing, and using
the Join WeGo™ application, please visit: www.JoinWeGo.com/support
CUSTOMER SUPPORT
If you have questions, comments or need assistance with your device
please feel free to contact Customer Support by calling 1-866-694-4575.
INCREASE VALUE OF
CURRENT SETTING
HOLD TO ENTER SETTINGS
PRESS TO CONFIRM
CURRENT SETTING &
ADVANCE TO THE NEXT SCREEN
HOUR MINUTE MONTH
HEIGHT WEIGHT PREFERRED UNIT OF
MEASURE
WO1592IS01SPO
16" × 8"
09/03/14
Richi
2- REMOVING BATTERY INSULATOR TAB
To activate your Activity Tracker after purchase, you must remove the
battery insulator tab inside the battery compartment.
1. Locate the tab on of the Activity Tracker.
2. Firmly grasp the tab and pull away from the Activity Tracker until
completely removed from the unit.
3. The unit will now be activated and the screen will be on.
5- OPERATING THE ACTIVITY TRACKER
The Activity Tracker automatically begins capturing data once
movement occurs. There are no Start or Stop buttons to push.
Scroll through display modes by PRESSING the MODE/RESET
button on the front of the unit.
DECREASE VALUE OF
CURRENT SETTING
STEPS
PRESS MODE BUTTON TO
DAY
SYNC
NOTE: The Activity Timer will automatically record your time moving and does not
YEAR
need to be started or stopped. The Stopwatch is a manual timer, and must be
started and stopped per the instructions on the next page.
3- BUTTONS AND THEIR FUNCTIONS
MODE/RESET BUTTON
• Operating Mode: Scrolls through display modes.
• Press & Hold: Resets Activity Tracker data
• Programming Mode: Decreases current value
SET BUTTON
• Operating Mode: Press & Hold to enter the Programming Sequence.
• Programming Mode: Accepts the information being adjusted and
advances to the next setting.
+ BUTTON
• Programming Mode: Increases current value
TO CLEAR ALL CURRENT ACTIVITY TRACKER DATA:
1. PRESS & HOLD the MODE/RESET button on the front of the unit.
2. Continue holding as the display reads "RESET".
3. When Activity Tracker data reads zeros (O), RELEASE the MODE/
RESET button. The unit is now ready for a new workout.
NOTE: Your personal profi le settings will be saved.
USING THE STOPWATCH:
DISTANCE CALORIES
ACTIVITY TIMER
1. Navigate to the Stopwatch/Chrono screen.
2. HOLD down the MODE button for 3 seconds to start the timer.
3. HOLD down the MODE button for 3 seconds to stop the timer. Continue
CHANGE SCREENS
HOLDING down the MODE button after the timer has stopped and it will
reset to 0.
STOPWATCH FAT BURN AVERAGE PACE
NOTE: Resetting the stopwatch screen does not reset the other Activity Tracker
data.
+
MODE/RESET SET
9/25/14 3:08 PM 9/25/14 3:08 PM