Vector Fog T 10 Instruction Manual

Replacing Lamps

Remove the cage situated at
the bottom of the trap by
unscrewing it anti-clockwise
Place both housings side by
side without disconnecting
the cable.

Attaching CO2 container

Using the Velcro sup-
Unscrew the bottle top
plied, please stick one
and fill half full with
side of the Velcro coin,
water. Place 1xCO2
on the centre of the
tablet inside. Screw the
mosquito cage as shown
top back on to the bottle.
on the picture above.
www.vectorfog.com
VectorFog™. Unit 3 Riverside Park, Dogflud Way, Farnham,GU9 7UG United Kingdom
To separate the middle housing
place the trap upside down and
push the 2 small grooves on the
fan casing outwards. This will
release it from the outer hous-
ing.
Carefully unplug the lamps from
their sockets and replace with new
ones. Reattach the housing and
cage.
To fix the container to the
To allow the Co2 be re-
bottom of the cage. Stick
leased. Press one sid of
the remaining side of the
the cap downwards as
Velcro Coin to the under-
shown in the picture above.
side of the bottle. Then
place bottle onto the
bottom of the cage to fix
Instruction Manual
T 10,15 FLY TRAP
Effective in luring mosquitoes with Ultra Violet light and CO2